TABLE OF CONTENT PRECAUTIONS .............................................................................................................. 2 INSTALLATION ................................................................................................................ 2 POWER CONNECTION ..................................................................................................... 2 USING THE BRACE .........................................................................................................
Precautions Installation • Do not cover or block the ventilation ports on the rear of the monitor. • Do not install the monitor close to heat sources such as radiators or air ducts, or in a location exposed to direct sunlight, excessive dust, mechanical vibration, or shock. Power connection • Use the correct power cord for your local voltage. • Use an accessible outlet close to the monitor. • Do not allow anything to rest on the power cable. • Only use the power adapter attached to the monitor.
Maintenance • Clean the cabinet and controls with a soft cloth lightly moistened with a mild detergent solution. Do not use any abrasive materials or solvents such as alcohol or benzene. • Do not rub, touch, or tap the surface of the screen with sharp or abrasive items such as pens or screwdrivers, as the screen may scratch. • Do not insert objects or spill liquids into the ventilation ports on the monitor’s rear, as fire, electric shock, and / or unit failure may result.
Getting Started Package contents Before beginning, ensure that the carton contains the following items: • Monitor • Power cord The power cord set shall be approved according to IEC 60227 and relevant national standard with conductors providing a cross-sectional area of 3 x 0.75min, type H05VV-F or H03VV-F.
Installation of First Use The installation of the monitor is very simple. What you need to do is to take the monitor from the packing box and remove all the packing materials, and then put the monitor on the desk carefully, rotating the brace on the back of the monitor to a fixed angle according to the arrowhead indication. Then the monitor can be settled very well. Next, adjust the monitor to a desired position according to the seat and other factors.
Identifying parts and controls This monitor has a bran new OSD menu: The control buttons as following: Functions of the buttons and indicator: Button Item Function Detail Show / Hide OSD Press this key to activate or deactivate the OSD menu. When power off, press this key; the monitor will power on. ON / OFF Switch When power on, press this key continuously; it will show countdown for three seconds, and then it will power off.
Press this key once; the OSD menu will be activated clockwise one by one. Function Selection Key Down Press the key continuously; the OSD menu group will be activated clockwise very quickly. Press the key constantly; you can reduce the volume of the speaker. Hotkey: Volume - / Mute On (Press the key continuously; it will mute on.) Setting Key Press this key; you can reduce the value of the option. Hotkey: Luminance Press this key; you can reduce the value of the luminance.
Press this key; you can adjust the image automatically. Automatically adjust the picture and performance. The AUTO function should be used the first time you use the monitor and after changing the resolution, and /or refresh rate of the input signal. Auto *To avoid others to alter the setting values of the monitor, the lock function of the OSD menu has been designed. Lock: When the monitor is power-off, press the and buttons at the same time and turn on the monitor.
Setup Follow these directions to correctly set up your monitor.
1. Please turn off PC power. 2. To connect the signal cable to the VGA or DVI port on your PC. Make sure connection is secure. 3. To connect the DC 12V plug of the power adapter to the Monitor DC 12V socket. 4. Connect the other plug of the power adapter to a power source. 5. Connect one end of the audio extension line to the interface of the Audio In, and another end is connected to the PC Sound Card’s Audio Out jack. 6.
Customizing your Monitor The On Screen Display (OSD) system provides a full range of customizable tools to optimize your display. Important: While full customization is available, we strongly recommend using the AUTO settings, which are preset to fully optimize your monitor’s performance. Simply presses the AUTO button to engage the AUTO settings. It is also recommended that you execute the AUTO function following any change made to your display from your computer. Working with OSD Group Press Menu 1.
2. Press or to adjust the setting values. (Press the keys continuously, when the setting value is number type, the value will increase or reduce 10 every time.) 3. The usage of the rest keys can be deduced from analogy. 4. Select , and then press the key menu.
Hotkey and the Characteristic Functions Introduction Volume Control Press Press the key (Press the key or to change the volume. continuously; it will mute on. or again; the sound will be resumed.) Luminance The contrast and luminance are two setting values that users adjust most frequently. However, it is not easy for users to set the proportions of these two values properly to acquire the best quality pictures.
avMode Doing official work, surfing on the internet, playing computer games, seeing films and so on are the common functions of computer. But during these activities, the factors such as the content of displaying, the distance from the user to the monitor, etc. are different and in order to obtain the best effect, different contrast and luminance, even color temperature are needed to adapt to the situations, especially when environment light of day and night differs so greatly.
Advanced Power Saving Mode The traditional monitors have the function of electricity-saving dormancy. But the interval of dormancy is difficult to decide. If the interval is too long, the purpose of saving electricity can not be achieved. While the interval is too short, after you answer a phone call, your monitor becomes dormant and you must press the keys to awake your computer. When the LCD monitor becomes dormant, the back lights will be turned off immediately.
OSD Icon List Function Detail Icon Brightness Light Contrast Sharpness Clock Screen Phase H-position V-position Warm Cold Color Color Temperature Normal Auto Color 16
English Français Deutsch Español Italiano OSD Language Nederlands РУССКИЙ User Define Română 繁體中文 简体中文 日本語 Power Manager Standard Power Saving Mode Advanced Power Saving Mode Recall Factory Select input VGA DVI 17
iRelax Set Timer Off, 15.30, 45, 60 (min.
Game Mode Volume + Speak On Volume Volume – Mute (Speak Off) Luminance Power Power On / Off 19
Troubleshooting This LCD Monitor has pre-adjusted using factory standard VGA timings. Due to the output timing differences among various VGA cards in the market, users may initially experience an unstable or unclear display whenever a new display mode or new VGA card is selected. Attention This LCD Monitor Supports Multiple VGA Modes. Refer to the Standard Timing for a listing of modes supported by this LCD Monitor.
another external CRT. If your PC system Functions properly with a CRT Monitor but it does not function with the LCD Monitor, the output timing of the VGA card may be out of the LCD’s synchronous range. Please change to an alternative mode listed in the Supported Timing List or replace the VGA card, and then repeat steps 1and 2.
LCD Panel Display Technical Features and Specifications Panel Screen Size 19"(48.3cm) diagonal Pixel Format 1280 x 1024 vertical strip Monitor Display Colors Input Signal Frequency Compatibility PC Connector Tilt Dimensions (W×H×D) Weight Horizontal: 30KHz –80KHz, Vertical: 50Hz -75Hz Max to 1280×1024@ 75Hz Analog 15-Pin D-Sub Digital DVI-I Connector Power 3-Pin AC Plug Tilt Angle Net Net Safety Regulations 16.2M with FRC or Dithering EMI VESA AC Power +10° ~ +30° 468.5 × 430.
Interface Frequency The following frequency range is the working period. If the entered mode between below period but not match the frequency of supported timing, display optimization not be assured. If the entered mode is out of the working period, the display will be blanking (just show “out of range”) then go to power saving. Basically, mode judgment is regardless the sync polarity except both or more modes that are all belong to the supported timing list and could be judged by sync polarity only.
Regulations FCC compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Information for users applicable in European Union countries The symbol on the product or its packaging signifies that this product has to be disposed separately from ordinary household wastes at its end of life. Please kindly be aware that this is your responsibility to dispose electronic equipment at recycling centers so as to help conserve natural resources. Each country in the European Union should have its collection centers for electrical and electronic equipment recycling.
TCO’99 Congratulations! You have just purchased a TCO’99 approved and labeled product! Your choice has provided you with a product developed for professional use. Your purchase has also contributed to reducing the burden on the environment and also to the further development of environmentally adapted electronics products.
TCO Development SE-114 94 Stockholm, Sweden Fax:+4687829207 Email (Internet): development@tco.se Current information regarding TCO’99 approved and labeled products may also be obtained via the Internet, using the address: http://www.tco-info.com/ Environmental requirements Flame retardants Flame retardants are present in printed circuit boards, cables, wires, casings and housings. Their purpose is to prevent, or at least to delay the spread of fire.