User Manual

25
ADJUSTING THE LCD MONITOR
4.4 Other Setting
1. Press the MENU button to call out the OSD window.
2. Press the t or u button to select
and press the MENU button to enter the Other menu.
PC VIVID Movie
VGA HDMIDP
16 : 9 AUTO
On Off
4 : 3
1920x1080 60Hz
Mode
Audio Volume
50
Signal Source
Aspect Ratio
Active Contrast
PC VIVID Movie
VGA HDMIDP
16 : 9 AUTO
On Off
4 : 3
1920x1080 60Hz
Mode
Audio Volume
50
Signal Source
Aspect Ratio
Active Contrast
3. Press the t or u button to select an option and press the MENU button to enter its
submenu.
Item Function Operation Range
Mode Selects the display mode.
Press the t or u button
to select the setting.
PC
VIVID
Movie
Audio Volume Adjusts the volume level of the built-in
speaker.
Press the t or u button
to adjust the value.
0 to 100
Signal Source Switches the input source.
Press the t or u button
to select the setting.
VGA
HDMI
DP
Aspect Ratio Selects the aspect ratio of the screen image.
16:9
AUTO
4:3
Active Contrast Automatically adjusts the image contrast
according to the scene.
Note: If this function is On, Colour >
Brightness/Contrast are grey out.
On
O󰀨
Over Drive Enhance the monitor response time.
On
O󰀨
Anti Blue Light Enables/Disables the blue light lter function.
When enabled, it decreases the amount of
blue light displayed on the screen,ensuring
users a comfortable viewing experience by
reducing eyestrain after long periods of use.
0 to 100
ANTI-BURN-IN ENABLE
Enables or disables Anti-Burn-in
TM
function.
On
O󰀨
INTERVAL (HOURS)
Selects the interval time (hour) between
activating the Anti-Burn-in
TM
function.
4
5
6
8