User Manual

19
CHAPTER 3: USING THE LCD DISPLAY
3.1 Turning on the Power
1 Connect the power cord to the power adapter. Then
connect the power adapter to the DC power input at the
rear of the LCD display.
2 Touch the POWER button to turn the LCD display on.
The LED indicator turns GREEN.
When the LCD display is turned on, touch the POWER
button to turn off the LCD display.
The LED indicator turns off.
Note:
♦ The LCD display still consumes
power as long as the power
cord is connected to the power
outlet. Disconnect the power
cord to completely cut off
power.
3.2 Selecting the Input Source Signal
Notes:
♦ After selecting an input source
signal, the input source signal
message appears on the
screen briey.
For example, CVBS1 is
selected the following message
is displayed.
CVBS1
INPUT
♦ If the selected input source
signal is not connected to the
LCD display or is turned off, the
no signal message is displayed
on the screen.
NO
SIGNAL
♦ If the resolution or the graphics
card of the connected computer
is set too high, the input out of
range message is displayed.
INPUT SIGNAL
OUT OF RANGE
Touch the button to select the input source signal.
POWER button
LED indicator
SOURCE button