User Manual

37
ADJUSTING THE LCD DISPLAY
5.8 SYSTEM
NTSC 60Hz
BRIGHTNESS
C OLOUR TEMP.
IMAGE SETTING
A SPECT RATIO
ANTI-BURN-IN
OSD SETTING
AUDIO SETTING
SYSTEM
ECO SMART
INPUT SELECT
L ANGUAGE
INFORMATION
SOURCE DETECT
P OWER SAVING
ON OFF
DDC/CI
ON OFF
DCR
ON
OFF
BLUE SCREEN
ON OFF
S IGNAL INFO
ON OFF
HDMI CEC
ON
OFF
LOGO
RECALL
ON OFF
LED
ON OFF
AUTO
M ANUAL
EXIT SELECT
ADJUST
MONITOR-ID
1
PRESS
1. Touch to call out the OSD window.
2. Select SYSTEM menu, then touch the
button.
3. Touch the
or button to select an
option.
Item Function Operation
Range /
Value
POWER
SAVING
Enables or disables power saving mode.
When the LCD display turns into power
saving mode, the screen turns black and the
LED indicator lights AMBER.
Note: The amount of time for the display to
enter power saving varies depending on the
SOURCE DETECT setting. If the SOURCE
DETECT is set to AUTO, the display checks
all input source signals before entering
power saving mode if no signal is detected;
this takes up more time. If the SOURCE
DETECT is set to MANUAL, the display
enters power saving mode right away.
Touch the
or button to
select the setting.
ON
OFF
SOURCE
DETECT
Sets the display to automatically or manually
detect the input source signal.
AUTO
MANUAL
DDC/CI
Activates the DDC/CI protocol to allow users
to congure the monitor by a software using
two wires on the VGA, DVI, HDMI, SDI, or
DP cables.
ON
OFF
DCR
(Dynamic
Contrast Ratio)
Activates DCR. This feature provides
automatic adjustment of picture brightness
and contrast at high speed and dynamic
contrast range, such as when watching
movies. DCR is suitable for indoor viewing.