User Manual

47
ADJUSTING THE LCD DISPLAY
Item Function Operation Range
ANTI-BURN-IN • “ENABLE” - Enables or disables Anti-
Burn-in
TM
function.
Press AUTO on the
control panel or OK
on the remote control
repeatedly.
OFF
ON
• “INTERVAL(HOURS)” - Selects the
interval time (hour) between activating
the Anti-Burn-in
TM
function.
4 HOURS
5 HOURS
6 HOURS
8 HOURS
• “MODE” - Set the Anti-Burn-in
TM
mode
to “A” (execute fast), “B” (slower but
more precise than mode “A”), or C
(slowest but the most precise mode).
A
B
C
RESET
DEFAULT
Resets all settings to the factory defaults.
ARE YOU SURE?
CANCELENTER
1 Press AUTO on the
control panel or OK
on the remote control.
2 Press p
/q on the
control panel or t/u
on the remote control
to select “ENTER” or
“CANCEL”.
3 Press AUTO on the
control panel or OK
on the remote control.
ENTER
CANCEL
5.4 INFO Menu
1. Press MENU on the control panel or on the remote control to call out the OSD window.
2. Press
p/q on the control panel or the remote control to select and then press AUTO on
the control panel or OK/
u on the remote control to enter the INFO menu.
INFORMATION
INPUT:
RESOLUTION:
HORIZONTAL FREQ:
VERTICAL FREQ:
F/W VERSION:
HDMI
1441x900
55.814KHz
59.8Hz
SC-32E V1.10.5
3. Review current input source, resolution, horizontal and vertical frequencies, and rmware
version.