Technical Specifications

MODEL 22O
22” x 22” Base x 34” Height*, 28 sq. in. of vents
The most popular size and easy to assemble in only
two pieces. Great for mid-size buildings such as
two-stall garages, small barns, and storage buildings.
MODEL 32O
30” x 30” Base x 51” Height*, 46 sq. in. of vents
The perfect two-piece size for large buildings such
as barns, utility buildings, and larger garages.
MODEL 42O
42” x 42” Base x 62” Height*, 66 sq. in. of vents
The largest two-piece model and the best choice
for very large buildings such as stores, pole barns,
and warehouses.
Color Selections
A variety of popular color
combinations are available.
Colors can be mixed and
matched in any combination
of top and base color. See
AG-CO.com for actual color
combinations.
ClayWhite Light GreyGreen Slate Blue BurgundyBlack Dark GreyRed BrownDark Blue Sandshade
Screw weathervane mast
into center of top
Just follow these easy steps.
1. Cut base to roof pitch
and attach to roof.
2. Attach cupola top
to base.
3. Attach weathervane
to cupola.
Each cupola base is
molded with 3/12,
4/12, and 5/12 roof pitch
guides to match most
common pitches.
If necessary, the base
may be cut to any
pitch up to 8/12.
* Before addition of Weathervane
Tan
MODEL 220 MODEL 320 MODEL 420
AVAILABLE IN THREE SIZES CHOOSING THE IDEAL NUMBER OF CUPOLAS INSTALLATION: AS EASY AS 1-2-3
A good guideline is one inch to one and
a half inches of cupola base for every foot
of uninterrupted roof ridge line. The chart
below will help you plan your installation.
A
FREE
Weathervane
with Every
Purchase!
3/12 4/12 5/12
24 feet (1) Model 220 (1) Model 320
32 feet (1) Model 320 (1) Model 420
40 feet (2) Model 220 (1) Model 420
48 feet (1) Model 420 (2) Model 320
56 feet (2) Model 320 (3) Model 220
64 feet (2) Model 320 (2) Model 420
72 feet (2) Model 420 (3) Model 320
OPTION 1 (QTY) OPTION 2 (QTY)RIDGE LENGTH