Owner`s manual

Using the Holiday Mode

________________________________________________________________

To Programme a Holiday -

Note: If at any stage you make any mistakes during this process, use the ‘Back Arrow’ button to

return to the relevant area and re-enter the correct information.

1. Press the ‘Suitcase’ button

2. The view will change to the ‘Holiday’ screen which is split into ‘Start’ and ‘End’ columns with

the start date highlighted in dark blue

3. Use the ‘+’ or ‘-‘ button to change the date

4. Press the ‘Suitcase’ button until the month is highlighted

5. Use the ‘+’ or ‘-‘ button to change the month

6. Press the ‘Suitcase’ button until the year is highlighted

7. If needed use the ‘+’ or ‘-‘ button to change the year

8. Press the ‘Suitcase’ button until the time is highlighted

9. Use the ‘+’ or ‘-‘ button to change the time. This may take some time as the time will cycle

through minutes followed by hours

10. Press the ‘Suitcase’ button until the date is highlighted in the ‘End’ column