Owner`s manual

15
2. Select the site for the handset and use the back plate to mark the position of fixing holes
3. Drill 6mm dia. holes with masonry drill for the raw plugs
4. Use raw plugs and screws supplied to fix the back plate to the wall
5. Stick the round self adhesive label supplied to the inside of the back plate to cover the screw
heads
6. Fix the handset to the back plate by locating the tag on to slot in back plate as shown below
Replacing the Handset Batteries
The handset is fitted with four AAA batteries. Battery life depends on usage.
Replace the batteries when the battery symbol on the handset is down to one bar following
the instructions below:
1. Remove the handset from the back plate
2. Remove the battery cover plate from the rear of the handset