Owner`s manual

8
Setting the Date & Time
________________________________________________________________
To Set the Date and Time -
Note: If at any stage you make any mistakes during this process, use the ‘Back Arrow’ button to
return to the relevant area and re-enter the correct information.
1. Press the ‘Clock’ button
2. The view will change to the Date and Time ‘Settings’ screen and the date will be highlighted
in dark blue
3. Using the ‘+’ or ‘-‘ button, cycle through the numbers until you get to the correct date e.g. 15
th
4. Press the ‘Clock’ button again until the month is highlighted
5. Again using the ‘+’ or ‘-‘ button change the month to the correct month
6. Press the ‘Clock’ button again until the year is highlighted
7. If needed use the ‘+’ or ‘-‘ button to change the year
8. Press the ‘Clock’ button again until the time is highlighted
9. Use the ‘+’ or ‘-‘ button to change the time. This may take some time as the clock will cycle
through minutes followed by hours
10. Press the ‘Clock’ button again until the day is highlighted
11. Use the ‘+’ or ‘-‘ button to change the day to the correct day e.g. Tuesday