In the In Passing the Passing Lane Lane SinceSince 1934 1934 PRODUCT CATALOG In the Passing Lane Since 1934 PRODUCT PRODUCTCATALOG CATALOG WWW WWW VELVAC VELVACCOM COM
With WithVelvac VelvacProducts Products You Yourere Always Alwaysininthe thePassing PassingLane Lane V V A VA V C C RV RV F F D D S S O O T T A A P P O GO G O O L L C C V V P P In theInPassing the Passing Lane Since Lane Since 1934 1934 T T NEW NEW M M P P H H B B RV RV L L POPPOP R R
TABLE OF CONTENTS Mirrors Electrical Products Hose Support Products West Coast Mirrors 3 Cable & Plug Assemblies 69 Hose & Cable Support Accessories 125 Blind Spot Convex Mirrors 6 Electrical Plugs 71 Pogo Sticks 127 Accessory Mirrors 9 Plug Adapters & Accessories 72 Wide Angle Mirrors 10 Electrical Sockets & Accessories 73 Fuel System Products Hood Mount Mirrors 11 Electrical Cable 75 Fuel Caps 129 Hood Mount Tripod Mirrors 12 Battery Cable 76 Anti-Siphon Tubes 132 Rear
Vehicle Mirrors 3-31 Table of Contents A West Coast Mirrors Blind Spot Convex Mirrors Accessory Mirrors Wide Angle Mirrors Hood Mount Mirrors Hood Mount Tripod Mirrors Rear Cross View Mirror Systems Van and Cab Chassis Mirrors Truck and Tractor Mirrors Walk in Van Mirrors Van and Cab Chassis Mirrors Mirror Replacement Parts Class A RV Bus and Truck Mirrors Brackets Clamps and Accessories V A OEM F W C Page 3 6 9 C M E Indicates an original Velvac® product VELVAC Original Revised Part No.
Velvac's 2010 West Coast Mirror Offers the Widest Viewing Area Available! • Larger glass 2010 mirrors feature over 106 square inch viewing area • Designed to fit any standard 17-1/2" span loop • Replaceable 1/8" FSC mirror glass • 4 amp, temperature-controlled • • • heating element provides quick, even defrosting and prevents mirror glass from overheating Polished 300 series stainless steel outer shell and heavy-duty ABS plastic inner housing combine to ensure durability and good looks Optional marke
MIRRORS WEST COAST MIRRORS (cont.
West Coast Mirrors • Quality West Coast Mirrors for new vehicle installation, replacement and retrofit • Designed with 1/8" silvered glass and 5/16" - 18 plated hardware - mounting fasteners are included • All West Coast mirrors are packaged in a display box except the Economy Angle Back mirrors Angle Back Round Corner - Full Flat or Split Glass Pillow Back Size Part No.
MIRRORS BLIND SPOT CONVEX MIRRORS Velvac offers a wide variety of convex mirrors including DuraBall®, K-10® Eyeball®, Three Screw Ball Stud and specialty convex. These mirrors are available in several finishes and materials including stainless steel, chrome, powder coat and painted. Standard convex, heated convex and Wide View lenses provide the right mirror for all your blind spot or cross view applications. VELVAC DuraBall® Convex Original 8.5" diameter • • • • • • 6" diameter 5" diameter 8.
DuraBall 8.5" diameter Finish Three Screw Ball Stud / Specialty Convex 8.5" diameter Standard 10" CENTER MOUNT Stainless Steel Black White Post Office White 8.5" CENTER MOUNT Stainless Steel Black White Post Office White Chrome Chrome Plated Stainless 8.5" OFFSET MOUNT Stainless Steel Black Chrome 7.5" CENTER MOUNT Stainless Steel Black Chrome 7.
MIRRORS BLIND SPOT CONVEX MIRRORS (cont.) K-10 Convex and Eyeball® Convex • • • • • Provides outstanding views of troublesome and dangerous blind-spots around the vehicle 10", 8.5" and 6" dia.
The Wedge™ Stick-On Convex Mirror Stick-On Convex Spot Mirrors • Unique wedge design provides • Lightweight aluminum shell • Mount easily and securely using more usable viewing area/larger image size than conventional stick on mirrors • Universal design permits use on both driver and passenger mirrors • Black plastic shell with rounded corners gives mirror a "built-in" look • 3.25" overall size with 8.5 ROC • Mounts easily and securely using attached adhesive pad Part No.
MIRRORS WIDE ANGLE MIRRORS Side Mount Wide Angle Mirror Heads VELVAC Original • The original Velvac wide angle mirror head for use on walk in van, cutaway van, cab chassis and a variety of other applications • 5/16" - 18 threaded mounting port for a clean, easy installation. Use with mounting clamp 704068 on page 31 • 1/8" replaceable FSC glass on all flat glass models except UPS brown which is silvered. Silvered glass on all convex 6.5" x 6" Flat Glass • Viewing Area 32 sq. in. Finish 6.
Velvac's Mod Pod™ and K-10 Version-2 Hood Mount Assemblies The popular Velvac Mod Pod and K-10 Version-2 (V-2) mirror systems incorporate a lock down feature that offers superior stability and easy adjustments. To position the mirror, simply loosen the set screw with a 5/32" allen wrench, lift and rotate the mirror arm into proper viewing or fold back position then retighten the set screw.
MIRRORS HOOD MOUNT MIRRORS (cont.) Velvac offers a full line of standard and short arm adjustable tripod mirror models to meet the needs of any vehicle or application. From our unique stylized Aero-Bell to our value tripod, we have the right mirror for your truck.
Straight Van Chassis Applications • Kits include mirror head, bracket and stainless steel mounting hardware • Assemblies include either a Velvac 8.5" Wide View convex or an 8.5" K-10 Eyeball convex mirror K-10 MIRRORS VELVAC Tripod Kits Vehicle 1992 and newer Ford E-Van 1997 and newer GM G Van Dodge & older GM & Ford Vans Sprinter Van FinishHead & Bracket Bracket/8.5" Wide View Convex Bracket Only Bracket/8.
MIRRORS REAR CROSS VIEW MIRROR SYSTEMS (cont.) RXV™/Corner Rotator • Designed to mount easily to structural rear corner of walk-in van or high cube bodies fits on 90° corner with up to 1.
Sprinter Van Body Mirror • Powder coated loop and cast mounting ends fit directly into older OE mounting base (not included) • Includes 6/5" x 10" upper flat glass head and 6.5" x 6" lower convex • For use up to 86" wide body applications NOTE : For Sprinter rear cross view mirror see page 13 Part No.
MIRRORS TRUCK AND TRACTOR MIRRORS Truck and Tractor Mirrors • Versatile head and loop assembly for • • flat side mounting on fire trucks and other specialty vehicles Bracket mounting span of 31.5" x 8.18" from body leg length All stainless steel construction with preset pivot breakaway system NOTE: See catalog page 3 for more information on motorized mirror head. See page 4 for OE V-back West Coast. Part No.
Walk-In Van Mirrors • Universal mirrors include an adjustable loop • • mounting bracket and will fit most walk-in van applications Fixed custom mirrors include a fixed loop bracket for specific mounting applications All mirrors include 6.5" x 10" upper flat glass head and 6.5" x 6" lower convex Universal Adjustable Loop Fixed Custom Part No.
MIRRORS 2020 VAN AND CAB CHASSIS MIRRORS Velvac's 2020 and 2020XG family of mirrors feature OE fit and styling, and provide outstanding visibility of passing lanes and blind spots areas around the vehicle making them the industry standard for wide body cutaway van and truck cab chassis applications. These mirrors mount directly to the OE sail area on the door for clean and easy installation.
A combination of styling, quality and performance make the 2020XG the new benchmark for wide body mirror systems. The fully integrated arm, base and mirror head not only look great, but work together as a system to reduce vibration, and provide large, clear views of the blind spots and passing lanes around the vehicle. Since these mirrors are designed specifically for 96" and 102" wide bodies , they provide a complete vision solution without the compromises found in many OE mirror offerings available today.
MIRRORS 2020 VAN AND CAB CHASSIS MIRRORS (cont.
2003 and Newer Ford E-Series Cutaway Van Mirrors Color Body Width Head Flt* Cx* Option* Type* Gls Gls 2020 Mirror System Pair** 86" 96" Black Rt Side Lft Side Std M 715401 715402 715403 Std H/R 715419 715420 715421 Std M 715404 715406 715405 Std H/R 715422 715424 715423 Std H/R 715455 715456 715457 715449 715450 715451 Deluxe M Ltd. M Deluxe H/R H/M Deluxe H/R H/M Ltd. Deluxe H/R H/M SO 715437 715438 715439 Deluxe H/R H/M SO Ltd.
MIRRORS 2020 VAN AND CAB CHASSIS MIRRORS (cont.) Chevrolet and GM Cutaway Van Mirrors Color Body Width 78" 86" 2020 Flt* Cx* Head Option* Gls Gls Type* Deluxe M Black 102" M 714601 714602 714603 H/R 714604 714606 714605 714593 714591 714592 Std M 714557 714558 714559 Std H/R 714563 714564 714565 Std H/R Deluxe M M Ltd.
Ford Super Duty F-250 to F-750 Color Body Width 86" 96" 2020 Flt* Cx* Head Option* Gls Gls Type* Std NEW 2020 Mirror System Pair** Rt Side Lft Side M 715141 715154 715153 Std M 714527 714528 714529 Std H/R 714533 714534 714535 Std H/R 714539 714540 714541 714515 714516 714517 Deluxe M Ltd. M Deluxe H/R H/M Black Deluxe H/R H/M Ltd.
MIRRORS 2020 VAN AND CAB CHASSIS MIRRORS (cont.) Model 2020SS Shuttle Mirror System • Door / Fender mirror systems available to fit both GM G Van and Ford E Van Chassis -96" or 102" body width • Superstar™ manual mirror with unitized flat and convex glass system - 51.5 Sq In flat / 23.5 Sq In Convex • Deluxe mirror with independently adjustable flat and • Deluxe mirror head w/ Mini LEM Superstar convex glass - 63.
2020 and 2020XG Mirror Replacement Parts and Accessories Standard Head Deluxe Head 2020XG Mirror 2020 Deluxe Head 2020 Standard Head RS LS RS LS RS LS GM Topkick - Kodiak RS LS Ford and GM Van MIRROR HEADS White Manual White H/R Flat - Man Convex 714590 714589 714576 714578 714576 714578 714580 714582 714579 714581 714575 714577 714575 714577 716974 714608 716973 714607 716434 716433 714256 714258 714256 714258 709407 709748 709407 709748 723068 723068 White H/R with lower marker lam
MIRRORS CLASS A RV, BUS AND TRUCK MIRRORS Velvac's line of side mount and corner mount mirrors are designed with a focus on safety, quality and styling. Typical applications include Class A motorhomes, motorcoach, fire truck and rescue vehicles.
Top Hat Add-On Convex Mirror • Installs easily on top of Deluxe • head for added visibility of blind spots or other vision targets Fits on either driver side or passenger side mirror Part No.
MIRRORS CLASS A RV, BUS AND TRUCK MIRRORS (cont.) Mirror Covers / Bras and Wiper Covers Fitted Covers and Bras • • • • • • Fitted covers and bras constructed from ultra Hi-grade, eight way stretch vinyl for durability and easy care Extreme duty plastic/stainless zipper for easy, quick on/off Protects mirror mechanisms and mirror chrome/finish from damaging air borne contaminanents and salt build up Protects against bees, wasps, mud daubers and birds.
Clamp and Tubing Arm Kits for 6", 8"and 8-1/2" Mirror Heads Clamp and Tubing Arm Kit for 5" and 6" Plastic Mirror Heads • Ideal for adding an auxiliary spot • Stainless steel formed tube arm • Zinc plated steel clamp • Ideal for adding an auxiliary spot mirror to existing loop or brace • For 3/4" O.D. tubing • Plastic coated clamp for secure grip and mar resistance • Overall length 6" Part No.
MIRRORS BRACKETS, CLAMPS AND ACCESSORIES (cont.) Nylon Clamp Kit for 3/4" O.D. Tubing Tubing Brace Clamp Kit for 3/4" O.D. Tubing • Non-corrosive black nylon clamp • Recessed fasteners provide a • Used to support tubing arms on custom look • Kit includes clamp and hardware Part No. 748416 Description Clamp Kit - Includes Clamp and Hardware for 3/4" O.D. Tubing Clamp Kit for 1" O.D.
Non-Preset Pivot Kit Spring Preset Pivot Kit • Replacement kit for mirrors with • Replacement kit for mirrors with • • Velvac non-preset pivot end and Velvac mirrors with standard pivot 5/16" - 18 x 1" stainless steel bolt Kit contains parts for one complete non-preset pivot end Part No.
Vision Systems 33-37 Table of Contents E Mirrors with Integrated Cameras Side View and Back up Cameras Monitors Cables and Mounts Back up Camera Kits Aero Cam B Page 33 33 34 35 35 36 V NHTSA CUTR DOT T Indicates a new product added to catalog NEW Indicates an original Velvac® product VELVAC Original Revised Part No. NOTE T V P A W D B F C Fax: Email: Indicates a revised part number S 800.783.8871 262.786.4101 sales@velvac.
CAMERA SYSTEMS Camera Systems • Building a camera system is fast and easy.
CAMERA SYSTEMS (cont.) Adjustable Back-up Camera • Manually adjustable camera mounting angle with external aluminum bracket and SS • Power 12Vdc • External bracket mount and mounting hardware included hardware CAMERAS • Built-in microphone for enhanced • • Part No. 709952 Part No. 710011 Fixed Top Mount Back-up Camera • • • • safety with audio output (through the monitor) while backing LED low light enhancement Waterproof housing Part No. 709912 709952 709964 709965 710011 Viewing Hsg.
CAMERA SYSTEMS (cont.) Select a Monitor Mount and Cables Cable quantity and length will vary based on number of cameras and distance from camera to monitor NEW Monitor Mounts 790564 790563 • Measure length from camera to Part No. 790563 to monitor • Select cable from chart below • Cables can be connected together to create various lengths Part No.
AERO CAM VISION SYSTEM CAMERAS VELVAC AERO CAM VISION SYSTEM Blind Spot Elimination for Heavy Duty Trucks NEW The Velvac Aero Cam is a camera-based vision system that provides the driver with clear and dedicated views of blind spots and passing lanes around the vehicle, resulting in improved safety and reduced potential for costly and dangerous accidents. According to NHTSA, depth perception and object recognition are the keys to safe vehicle operation.
AERO CAM VISION SYSTEM (cont.
Air Products 39-67 Table of Contents F Gladhands Air Brake Hose Nylon Tubing Air Brake Valves Air Accessory Valves Pressure Switches and Indicators Air Tank Accessories Air Tanks Brake Chambers Diaphragms Air Cylinder Control Valves Air Cylinders Air Cylinder Tailgate Lock Kits Lift Axle and Suspension Valves V O TS Indicates an original Velvac® product VELVAC Original Revised Part No.
GLADHANDS Iron Gladhands with Polyurethane Seals Premium Powder Coated Gladhand 37˚ Bracket Mount Gladhands Lifetime guarantee covers both gladhands and seals! • Solid, one-piece construction • Service and emergency gladhand color-coated for easy identification • included • • Color-coded polyurethane seal • Positive, spring loaded locking mechanism keeps gladhand properly positioned 1/2" FPT port Gladhands meet SAE J318 requirements including breakaway requirement Part No.
GLADHANDS (cont.) Pivoting Gladhands Plated Aluminum Gladhands NEW With E-Coating • E-Coated aluminum improves corrosion resistance and provides better • Spring loaded to safely swing out of the way when not in use • Seals out contaminants when not in AIR • use 3/8" - 18 NPTF ports Part No.
GLADHANDS (cont.) Gladhand Seals with NEW Built-in Screens GladhandL™ Gladhand Grips Dummy Coupling Part No. 035036 • Polyurethane seals with stainless Stow-A-Way™ Gladhand and Plug Holder • Durable zinc-plated steel Part No. 035070 Part No. 035178 • 1/2" NPTF • Sold in pairs in an attactive display package with information header • Part No. 035070, polyurethane style features a soft grip with a machined steel core • Part No.
AIR BRAKE HOSE AND TUBING Air Brake Hose Part No. 022011 022011-7 022047 022047-7 Hose I.D. 3/8" 3/8" 1/2" 1/2" Coil Length 50' 250' 50' 250' Hose O.D.
AIR BRAKE HOSE AND TUBING (cont.) Air Compressor Discharge Hose Part No. 142113 142113-7 142114 I.D. 1/2" Coil Length 25' 100' 25' O.D.
AIR BRAKE HOSE AND TUBING (cont.) Coiled Nylon Tubing Assembly Kits • Assemblies include permanently swaged 1/2" - 14 NPTF end fittings with heavy gauge spring for extra support • Each Standard kit contains one Emergency (RED) and one Service (BLUE) 1/2" O.D. nylon tubing assembly • Assemblies meet SAE J844 and FMVSS 106 requirements 15' and 20' Assembly Kit 12' Assembly Kit • 6" lead on both ends AIR Part No.
AIR BRAKE VALVES Dash Control Valves (PP-1, PP-2, PP-3, PP-7 and PP-8 Styles) Part No.
AIR BRAKE VALVES (cont.) Knob and Pin Kits Part No. 034054 Part No. Description Replaces 034049 Trailer Air Supply Knob and Pin Kit for PP-7 Style Dash Control Valve Parking Brake Knob and Pin Kit for PP-1 Style Dash Control Valves Plain Black Knob and Pin Pull to Park/Push to Release Parking Brake Knob and Pin Kit for PP-1, PP-2 and PP-3 Style Dash Control Valve Dash Control Valve Mounting Nut Bendix 290655 & Midland KN20900 Bendix 248433 & Midland KN20903 Bendix 241866 Bendix 240302 034050 Part No.
AIR BRAKE VALVES (cont.) Relay Valves (R-12 and R-14 Styles) Relay Valve • Direct replacement for Midland R-14 1/8" NPT balance port located under exhaust cover R-14 Style 1/2" NPT R-12 Style Style R-12 Supply Port(s) 1/2" NPT Delivery Ports Vert.-(4) 1/2" NPT 034026 034027 034028 R-12 R-14 R-14 (2) 3/4" NPT (2) 3/4" NPT 1/2" NPT Horiz -(2) 1/2" NPT Horiz -(2) 1/2" NPT Vert.
AIR BRAKE VALVES (cont.) Air Governors (D-2 Style) • Factory preset opening and closing pressures of 100 to 120 psi • (6) 1/8" NPT ports and two mounting • • AIR • holes Mounting gasket and (4) 1/8" socket head pipe plugs included High temperature governor designed with high temperature withstanding O-rings Individually boxed Part No.
AIR BRAKE VALVES (cont.) In-Line Quick Release Valves Quick Release Valves (QR-1 Style) Part No. 032020 Part No. 032019 • Speeds up release of trailer service brakes when • 3/8" NPT exhaust port • (2) 11/32" mounting holes at 1-1/2" on center • Cracking pressure of 1 psi installed on service side gladhand • Speeds up application of trailer parking brakes when installed on emergency side gladhand • • Exhaust - 8.
AIR BRAKE VALVES (cont.) Air Tractor Control Kits • Kits add hand and foot control to • AIR • trucks with pre-FMVSS 121 air brakes hauling an air brake trailer (for trucks with FMVSS 121 air brakes, consult the truck manufacturer) Hose assembly jumper lines and support springs included with kit (kit No. 131012 only) Hand control valve included (except for Part No. 131016).
AIR ACCESSORY VALVES (cont.) Power Take-off and Dump Pump Control Valve Kit Power Take-Off Four-Way Control Valve • Replaces Chelsea 328865X • Panel-mounted, three position valve with 1/4" built-in push-to-connect fittings, in-line fuse holder with 9 amp fuse, cable, pressure protection valve 1/4" nylon tubing (50') and fittings-control valve assembly also sold separately Part No.
AIR ACCESSORY VALVES (cont.) Air and Air-Electric Three-Way Toggle and Flipper Valves • Push-connect fittings mate AIR B C D Part No.
AIR ACCESSORY VALVES (cont.) Height Control Valves Standard Leveling Valve, Cab Leveling Valve and a Rapid Dump Feature valve The Shear-Seal® Advantage In the past industry expectations for commercial vehicle air suspension height control valves was limited. Designs were based on seals that wore rapidly, requiring frequent replacement. As the seals failed, height control performance deteriorated and air consumption increased. Valve replacement and downtime costs were rising with trucking demand.
AIR ACCESSORY VALVES (cont.) Shear-Seal® Height Control Valve Part No. 034122 Part No. 034124 AIR Part No. 034123 Part No. 034112 Part No. 034126 Part No. 034101 Part No. 034113 Part No. 034111 Part No. 034114 Shear-Seal® Height Control Valve Linkage and Hardware Adjustable Linkage • • • • Adjusts for 8-3/4" to 14-1/2" 1/4" diameter mounting bolts Zinc plated steel rods Elastomer ends Part No. 034135 Part No. 034136 Adjustable Linkage Part No.
AIR ACCESSORY VALVES (cont.) Height Control Valves Part No. 034065-Delayed Response** Part No. 032139 AIR Part No. 034064-Immediate Response Part No. 032140 Part No. 032139 032140 032141* 034064 034065** Ports 1/8" NPT 1/4" NPT 1/4" NPT 1/4" NPT 1/8" NPT Description Includes Linkage and Brackets Valve Only Includes Built-In Dump Valve Includes Linkage Kit Includes Fitting Package Part No.
AIR ACCESSORY VALVES (cont.) Pressure Protection Valves • Designed for convenient in-tank • • • • • Nominally closed Nominal closing pressure 65-75 psi (2) 1/4" FPT ports 150 psi maximum operating pressure Description Pressure Protection Valve AIR Part No. 032086 mounting on tanks with dual outlet ports All valves except Part No.
PRESSURE SWITCHES AND INDICATORS Air Pressure Gauge Brake Light Switch (SL-4 Style) Pressure Regulator Valve • Direct replacement for Bendix 228600 • 1-1/2" diameter dial • Accommodates a 1/8" FPT port • Pressure range of 0 - 160 psi Part No. 035065 • 1/4" NPT supply • Actuates at 3-5 psi Part No.
AIR TANK ACCESSORIES Air Dryer Replacement Cartridges Air Dryer Wiring Harness • Direct replacement for Bendix 109869, 109871, 298948 • Fits both 12 and 24 volt AD-9, AD-SP, Part No. 034046 Part No. 034047 Part No. 034048 • All include seal rings AD-IP and System Saver 1200 units • 22" leads AIR Part No. 034091 Part No.
AIR TANK ACCESSORIES (cont.) Single Check Valves Drain Pull Valves Part No. 034045 Part No. 034044 Part No. 320003 Part No. 320014 Part No. 320001 Description 1/4" Threads 3/8" Threads 320001 1/2" Threads 034045 320003 1/2" Female Threads 3/4" Threads Replaces Bendix 229603, 800375 Bendix 227870, 800373 & Midland KN23010 Bendix 227717, 227788, 227871, 800372 & Midland KN23000 Bendix 800370 Midland KN23040 Air Tank Drain Cocks Part No. 036019 Part No. No 036003 • 1/4" MPT Part No.
AIR TANKS, BRAKE CHAMBERS AND DIAPHRAGMS Air Tanks AIR Type 1 - Bracket Mounted Type 3 - Flange Mounted Type 2 - Flange Mounted Type 4 - Flange Mounted • All tanks feature dual main ports except Part No 035103 • All steel construction • All tanks are water tested prior to shipping • Dipped tanks are rust resistant and primer sealed • Internally corrosion resistant • Tanks meet SAE J10 requirements Part No.
AIR CYLINDER CONTROL VALVES Anodized aluminum clear-coated bodies • Nitrile seals for long cycle life • High impact knobs Balanced spool design • Operating temperature range from -40° F to + 180°F •Stainless steel hardware • Normal operating pressure 100 psi Four-Way Push/Pull Valves Both faceplates included • Aluminum shaft with stainless steel • • • • APPLICATIONS FOR VALVES • Two position valve operates any Four-Way Electronic Solenoid Valve • The compact design fits into today's • Operates any s
AIR CYLINDERS E D C AIR Backed by a 3 year warranty Velvac's heavy-duty Enforcer™ series of air cylinders are built tough for long life and made from some of the strongest materials available today! • Machined from 6061 series aluminum, 303 stainless steel, with Nitrile "O" rings and a UHMW polyethylene wear band, they are the ultimate air cylinder! • Cycle tested into the millions! The solid construction means they will keep on working even in extreme conditions where other air cylinders fail! • These
AIR CYLINDERS (cont.
AIR CYLINDERS (cont.) Backed by a 3 year warranty AIR High Lift Cylinder Made in the U.S.A. General Information Cylinder Tube Front Cover Rear Cover Piston Cup Temp Rating Pressure Rating Part No.
VELVAC AIR CYLINDER TAILGATE LOCK KITS Original Part No. 100022 100028 Cylinder Diameter/Stroke 2-1/2" x 8" Kit, contents as shown 2-1/2" x 8" Kit, contents as shown, plus 50' of 3/8" black nylon 101002 3-1/2" x 8" Kit, contents as shown, plus 50' of 3/8" black nylon tubing and clips and extended clevis kit Part No. 019015 (see page 127) Part No. 101054 101058 Cylinder Diameter/Stroke 2-1/2" x 8" Kit, contents as shown 3-1/2" x 8" Kit, contents as shown Part No.
LIFT AXLE AND SUSPENSION VALVES Manual Push/Pull Valves High flow dual pressure air valves for lift axles, suspension dump systems and tailgate control - solid aluminum construction - Nitrile seals for long cycle life - High impact knobs with face plates - Balanced stainless steel and aluminum spool design - Operating temperature range from -40 to +180 F - Stainless steel hardware - Normal operating pressure 100 psi Part No.
LIFT AXLE AND SUSPENSION VALVES (cont.) SOLENOID VALVES Solenoid valves allow the driver to operate single or double acting cylinders, lift axles or suspension dump systems electronically - Constructed with the same materials as Velvac's air accessory valves - The solenoid valves have a 12volt power consumption coil that uses only 4.8 watts - Normal operating pressure 100 psi Part No.
Electrical 69-101 F ISO Table of Contents ABS Cable Plug Assemblies Electrical Plugs Plug Adapters Accessories Electrical Sockets Accessories Electrical Cable Battery Cable Battery Lugs Battery Terminals Switches Solenoids Signal Flashers Circuit Breakers Fuses Accessories Terminals Connectors Primary Wire Accessories Heat Shrink Tubing Tie Straps Grommets Wire Clips Shop Tools Accessories Tape Products V D N V T V L P Indicates an original Velvac® product VELVAC Original Revised Part No.
CABLE AND PLUG ASSEMBLIES Seven-Way ISO Coiled Cable Assemblies Seven-Way ABS Coiled Cable Assemblies Seven-Way Coiled Cable Assemblies • Durable black outer jacket resists • Used in tractor/trailer systems • • Part No.
CABLE AND PLUG ASSEMBLIES (cont) Six-Way Coiled Cable Assembly • 12" working length • Durable black outer jacket resists • abrasion and has excellent coil memory Heavy-duty zinc die cast plugs with spring guards included ELECTRICAL Single Pole Coiled Cable Assemblies Part No.
ELECTRICAL PLUGS Seven-Way Plugs Single Pole Plugs Two Pole Plug T-Grip Part No. 591161 ISO Plug • • • • Plastic Plug with Weather Guard • Heavy-duty nickel-plated zinc die • • • T-Grip Seven-Way Plugs Part No. 593057 593101 593111 593059 593060 Description Plug with Spring Guard ISO Plug with Spring Guard Plastic Plug with Weather Guard Replacement Interior for Part Nos. 593057, 593111 Replacement Spring Guard Part No. 591105 • Used to provide power to heavy Part No.
PLUG ADAPTERS AND ACCESSORIES Truck Tractor to Trailer Adapters Continuity Testers Female Pins Four-Way Flat Set Part No. 057118 Part No. 591009 Male Pins Part No. 057119 • 48" lead (female) side and 12" Part No. 591010 lead (male) side • Constructed of molded PVC for impact resistance Part No. 057120 • ATA color-coded: White: Green: Ground Right Turn and Brake Lights Yellow: Left Turn and Brake Lights Brown: Tail Lights Part No. 591115 ELECTRICAL Part No. 591116 Part No.
ELECTRICAL SOCKETS AND ACCESSORIES Seven-Way Circuit Breaker Sockets and Adapter Boxes Deep Adapter Box with Bottom Entry • • • • • • • • Deep Adapter Box with Back Entry Non-corrosive, reinforced nylon housing for added durability Designed for #8 ring terminals (see page 92) ATA color-coded contacts (see page 75 for ATA color code chart) Solid brass split pins are zinc-plated for corrosion resistance Each socket includes automatic reset circuit breakers with positive snap open/snap closed action to eli
ELECTRICAL SOCKETS AND ACCESSORIES (cont.) Seven-Way Sockets Two Hole Socket with Screw Terminals ISO Seven-Way Socket • Used in tractor/trailer systems Two Hole Socket with Push Terminals Optional Terminal • Non-corrosive, reinforced nylon housing for added durability • Screw type socket with split pins designed for #8 ring terminals (see page 92) • Push type socket with solid pins designed for 180 snap receptacles ELECTRICAL • • • • • (see Part No.
ELECTRICAL CABLE Battery and Starter Cable Red Jacketed Black Jacketed Part No. 058033 058033-7 058035 058035-7 058037 058037-7 058039 058039-7 058241 058241-7 058243 058243-7 058245 058247 Part No.
BATTERY CABLE Battery-to-Battery Crossover Cable • 2/0 gauge wire • Molded lead terminals and black neoprene outer jacket Part No. 058212 Description 12" Battery Crossover Cable Ground Strap • 4 gauge wire • Molded zinc-plated steel lugs and tin-plated copper stranding • 7/16" diameter bolt hole Part No. 058116 Description Ground Strap (12" - 14") Switch-to-Starter Battery Cable • 4 gauge wire • Molded zinc-plated steel lugs and red PVC outer jacket Part No.
BATTERY LUGS • Fully annealed electrolytic copper construction provides excellent conductivity • Wire gauge identification marked on lug barrels • Heat -shrink tubing should be used over all battery terminal connections (see page 98) Standard Battery Lugs • Unique flared barrel design eliminates wire strand hang-ups • Unplated • Crimpable Part No.
BATTERY TERMINALS Crimpable or Solderable Battery Terminals • • • • • • • • One-piece, cast copper construction Lead-plated for corrosion resistance Cable size clearly designated on terminals to ensure correct size selection Polarity shown on terminals to avoid mixing positive and negative connections.
BATTERY TERMINALS (cont.) Battery Stud Nut Medium-Duty Terminal Side Post Terminal • Stainless steel construction • For 6 to 2 gauge wire • For 6 to 2 gauge wire Part No. 058068 Part No. 058012 Part No. 058013 Description 3/8" Battery Stud Nut Heavy-Duty Terminal Description Medium-Duty Terminal Three-Way Battery Terminals Description Side Post Terminal Marine Terminal plated steel bolts and nuts • For 1" 4/0 gauge wire • Both positive and negative terminals included Part No.
SWITCHES AND SOLENOIDS Heavy Duty Toggle Switches D A C B E F G ELECTRICAL • • • • H Frame and support constructed from steel with zinc chromate, brass terminals Neoprene-sealed toggles are moisture and dust resistant Fully assembled with locating ring/tongue nut (and On/Off faceplate on single pole switches only) 1/2" diameter recommended mounting hole- all toggles must be installed with provided hex nut behind panel to prevent damage during installation • Packaging for all switches displays easily
SWITCHES AND SOLENOIDS (cont.) Indicator Lights Toggle Accessories Red Cap • Chrome housing and nylon base • LED's rated for 15mA at 12 VDC • 100,000 hours estimated bulb life • • • expectancy Temperature rating up to +185 F (85 C) 20 AWG lead wires 7/16" diameter recommended mounting hole Part No.
SWITCHES AND SOLENOIDS (cont.) Full Size Rocker Switches Standard Standard Part No.
SWITCHES AND SOLENOIDS (cont.) Two-Speed Axle Switch and Automatic Terminal Block Switch Three Wire Connector Push/Pull Two Position Axle Switch Part No. 090225 Terminal Block Switch • Terminal block switch used in • Part No. 090078 090079 conjunction with axle switch to control two-speed electric axle shift Axle switch has red knob and uses (3) .156" female snap plugs (see page 93) Description Two-Speed Axle Switch Automatic Terminal Block Switch Part No.
SWITCHES AND SOLENOIDS (cont.) Universal Ignition Switch Push / Pull Switches Keys Included • Single throw ignition • 6 to 24 VDC • 3/4" diameter mounting stem with two terminals Part No.
SIGNAL FLASHERS Electro-Mechanical and Electronic Flashers Solid State LED Flasher • Designed and tested to perform in excess of one million cycles • Audible signal indicates that flasher is activated • Non-polarity sensitive • 12 VDC operating range Style A Electro-Mechanical Style B Electronic Part No.
CIRCUIT BREAKERS Standard Circuit Breakers Fuse Clip Circuit Breakers Universal Snap-off Blade Type Circuit Breakers Tab C - For Kenworth Trucks • Copper colored battery stud • • • • provides easy identification "Waterproof" sealant and insert molded studs on waterpproof breakers make them suitable for marine applications and trailer connections 12 VDC Meet applkicable SAE J553 requirements Each circuit breaker includes two #10-32 nuts ELECTRICAL Part No.
FUSES AND ACCESSORIES Fuses AGC, AGX and SFE Fuses Part No. AGC AGX SFE Description — 091131-5 1 Amp — 091132-5 2 Amp — 091133-5 3 Amp — See Below 4 Amp — — — 091135-5 5 Amp — See Below 6 Amp — — 091137-5 See Below 7-1/2 Amp — See Below 9 Amp — — 091140-5 10 Amp — — 091141-5 15 Amp — — 091142-5 See Below 091171-5 20 Amp 091143-5 25 Amp — — 091144-5 See Below 091172-5 30 Amp includes (2) 20 Amp.
FUSES AND ACCESSORIES (cont.) Universal In-Line Fuse holder Heavy Duty In-Line Fuse holder Heavy Duty ATC/ATO® In-Line Fuse holders • Universal nylon twist-lock • Nylon heavy duty fuse holder for • Fit blade type fuses from 3 to 30 • • • fuse holder for 1/4" x 1-1/4" AGC, AGA, AGW, AGX and SFE fuses 20 amp maximum load 14 gauge lead wire Fuse sold separately ELECTRICAL Part No.
FUSES AND ACCESSORIES (cont.) Fuse Kits • Convenient, pre-packaged fuse assortments save time by keeping popular sized fuses close at hand • Durable, see-through plastic cases with handy "locator" cards are easy to refill for using over and over • Multi-functional kits can be displayed on the front counter to attract the impulse sale of single fuses or used as mini storage systems to save time and money by eliminating multiple trips to the shop for additional parts Part No.
TERMINALS AND CONNECTORS Velvac offers a wide variety of terminals and connectors.
TERMINALS AND CONNECTORS (cont.) BUTT CONNECTORS Wire Crimp Gauge Part No. Insulation 22-18 22-18 16-14 16-14 12-10 12-10 056051-50* 057085-50 056052-50* 057086-50* 056053-50* 057087-50* Crimp/Seal Crimp/Solder/Seal Insulation Part No. Vinyl-butted 058312-50* Heat shrink Nylon-smls** Vinyl-butted 058313-40* Heat shrink Nylon-smls** Vinyl-butted 058314-40* Heat shrink Nylon-smls** Heatless Part No. Insulation Part No.
TERMINALS AND CONNECTORS (cont.) RING TONGUE CONNECTORS Wire Gauge Part No. Crimp Stud Size, Insulation Part No.
TERMINALS AND CONNECTORS (cont.) MALE QUICK SLIDE TERMINALS AND CONNECTORS - TAB WIDTH .250" Wire Gauge Part No. Crimp Insulation Part No. Nylon Nylon Nylon Fully Insulated 056063-50 056064-50* 057090-50 056065-50* 057091-50 Double Male to Female 056088-50 None Crimp/Seal Part No. Insulation Crimp/Solder/Seal Part No.
TERMINALS AND CONNECTORS (cont.) Terminal Kits • Convenient, pre-packaged terminal assortments • Durable, see-through plastic cases with handy "locator" cards are easy to identify and refill • Multi-functional kits can be displayed on the front counter to attract the impulse sale of single terminals or used as mini storage system ELECTRICAL Part No. 056107 056108 056109 Description Solderless Terminal Kit Heat-Shrink Terminal Kit Electrical Connector Kit Electrical Connector Kit Part No.
PRIMARY WIRE AND ACCESSORIES General Purpose Primary Wire • Soft annealed copper strands • Designed to withstand • PVC outer jacket • Wire meets SAE J1128 Type GPT temperatures up to +250 F requirements Spool Size 100' 100' 100' 1000' 1000' 1000' 1000' 100' 100' 100' 100' 100' 100' 100' 1000' 1000' 1000' 1000' 1000 1000' 1000' 1000' 100' 100' 100' Gauge 18 18 18 16 16 16 16 16 16 16 16 16 16 16 14 14 14 14 14 14 14 14 14 14 Color Black Red White Black Red White Green Black Red White Yellow Blue Brow
PRIMARY WIRE AND ACCESSORIES (cont.) Gray Jacketed Parallel Wire Part No. 14 Gauge Black-White 051058 051058-7 16 Gauge Black-White 051050 051050-7 12 Gauge Black-White 051066 — Spool Size 100' 500' ELECTRICAL Three-Way and Four-Way Bonded Parallel Wire* Part No.
HEAT-SHRINK TUBING Heavy Wall Heat-Shrink Tubing With Liner • Durable polyolefin construction • Inner liner melts to produce a • • • • flexible, waterproof seal for the life of the connection UL Listed/CSA certified in direct buried applications Flame retardant 3:1 shrink ratio See page 121 for heat gunrecommended heat range is 250 F (120 ) to 485 (250 C) Part No. 057147-10 057158-10 057073-10 057151-25 057153-2 057074-10 057098-25 057174-2 Wire Gauge I.D. PreRange Length Shrink 6" .300" 18-14 6" .
HEAT SHRINK TUBING (cont.) Thin Wall Heat-Shrink Tubing • Disk packaging for convenient storage and waste reduction • Packaged for showroom display and • • impulse buying Available in three colors corresponding to NEMA color-code standards Convenient packaging easily fits in toolbox Part No.
TIE STRAPS, GROMMETS AND WIRE CLIPS (cont.) Rubber Grommets Part No. 021059 021061 021063 021065 Nylon Grommet • Provides protection for 16, 14 and Part No. 021070 C 5/16" 1/2" 5/8" 3/4" Tube Clips • Zinc-plated steel construction for corrosion resistance • Rubber coating protects tubing and wires Part No. 021001 021003 021005 021007 021009 021011 021013 021015 021017 021019 D 3/16" 1/2" 3/8" 1/2" E 1/16" 1/8" 1/8" 7/32" Tube O.D.
SHOP TOOLS AND ACCESSORIES Work Lights Short Tube Work Light 13 Watt Long Tube Work Light 15 Watt • Incandescent light includes • Fluorescent light features new • Fluorescent light features shatter • ELECTRICAL • • grounded metal swing-open bulb guard and 25' 16/3 outdoor allweather power cord (cord remains flexible in sub-zero temperatures to -20˚) On/Off switch, grounded three prong outlet and 13 amp resettable circuit breaker built into handle Metal hanging hook For use with up to 75 watt standa
SHOP TOOLS AND ACCESSORIES (cont.) Heat Gun • Produces temperatures from 750 • to 1100 F Built-in circuit breaker and three position switch (hot / off / fan only) Part No.
Back up Alarms Table of Contents V Back up Alarms F OEM Indicates a new product added to catalog NEW Indicates an original Velvac® product VELVAC Original Revised Part No. NOTE T V P A W Page D B F C Fax: Email: Indicates a revised part number S 800.783.8871 262.786.4101 sales@velvac.
BACK-UP ALARMS Velvac offers a complete line of back-up alarms, warning devices and switches to meet the needs of almost every application and work environment. From our heavy duty OEM style alarms with patented double reflex horn, to our broad line of speaker alarms, we have the right alarm to meet your needs and price targets. Double Reflex Horn Style Back-up Alarms 24" High Efficiency Sound Path Part Nos. 697002 and 697007 Part Nos.
BACK-UP ALARMS (cont.) Speaker Style Back-up Alarms • High impact glass filled nylon housing meets high temperature demands • • • • • • • of SAE J994 and UL requirements for flame testing. Provides durability needed for even tough work and vehicle environments Epoxy encapsulation protects electronics against moisture allowing steam cleaning or pressure washing. Thin coat epoxy process helps dissipate heat faster keeping the alarm cooler for longer product life.
BACK-UP ALARMS (cont.) Flush Mount Back-Up Alarms Flush mount alarms allow for fast and convenient mounting into either 1.75" or 4" diameter holes in the vehicle body. • High impact glass filled nylon housing meets high temperature demands of • • • • Part Nos.
Fittings 107-123 Table of Contents V Push Lock Air Brake Fittings Nylon Air Brake Tube Fittings Air Brake Compression Fittings Reusable Air Hose Fittings Discharge Hose Fittings Pipe Fittings SAE Flare Fittings Inverted Flare Fittings Truck Trailer Repair Kits Fitting Assortments Hose Clamp Coolant Valves Clevis Clevis Pins F V P C T T T H S Page C Heavy gauge to exceed SAE torque E Indicates a new product added to catalog NEW Indicates an original Velvac® product VELVAC Original Revised Part
PUSH-LOCK AIR BRAKE FITTINGS • Designed for use with SAE J844 • • • nylon tubing (see page 44) DOT 49CFR 571.
PUSH-LOCK AIR BRAKE FITTINGS (cont.) Union "Y" Female Bulkhead Connector Female Elbow Part No. 016812 016813 Part No. 016247 016248 016249 • Composite body Part No. 016289 016291 016290 Description 1/4 x 1/4 x 1/4 1/4 x 1/4 x 3/8 3/8 x 3/8 x 3/8 Tube Size 1/4" 3/8" Male Connectors Thread Size 1/4" 1/4" Tube Size 1/4" 1/4" 3/8" NEW Thread Size 1/8" 1/4" 1/4" (Sealant Applied) Union 90˚ Elbow Union Tees • Brass Construction • Composite body Part No.
NYLON AIR BRAKE TUBE FITTINGS • Designed for use with nylon air Female Elbows Female Connectors brake tubing (see page 44) • DOT compliant. Fittings meet SAE J246 requirements • Brass construction with internal stainless steel tube supports • Pipe thread sealant featured on several fitting styles. This preapplied sealant offers several benefits • Provides no-leak assembly instantly.
NYLON AIR BRAKE TUBE FITTINGS (cont.) Male Connectors (Sealant Applied) Tee Thread Runs (Sealant Applied) Part No. 017142 017144 017164 017166 017186 017188 017118 Tube Size 1/4" 1/4" 3/8" 3/8" 1/2" 1/2" 5/8" Pipe Size 1/8" 1/4" 1/4" 3/8" 3/8" 1/2" 1/2" HELPFUL HINT Refer to page 43 for Air Brake Hose Repair Fitting Kits 500007 and 500008 Part No.
AIR BRAKE COMPRESSION FITTINGS (cont.) Male Elbows Female Elbows Full Unions (Sealant Applied) Part No. 012067 012071 012073 012087 012091 012093 012095 012097 013001 013003 013011 Tube Size 1/4" 1/4" 1/4" 3/8" 3/8" 3/8" 3/8" 1/2" 1/2" 1/2" 5/8" Pipe Size 1/8" 1/4" 3/8" 1/8" 1/4" 3/8" 1/2" 1/4" 3/8" 1/2" 1/2" Part No.
REUSABLE AIR HOSE FITTINGS (cont.) Fitting Assemblies with Spring Part No. 500019 500025 500027 500070 500078 Hose I.D. 3/8" 3/8" 3/8" 1/2" 1/2" Pipe Size 1/2" 3/8" 1/4" 1/2" 3/8" Nuts Part No. 500004 500054 Hose I.D. 3/8" 1/2" Dual Barb Male Fitting Hose Splicer Part No. 500079 500080 500081 500082 500083 500084 500085 Part No.
DISCHARGE HOSE FITTINGS Straight Tubes Male Pipe Fitting Part No. 142102 142103 Part No. 142101 • Designed for use with stainless • steel braded discharge hose (see page 43) All brass bodies with brass sleeves and steel nuts Female Swivel Fittings Part No. 142110 142111 Hose O.D. 5/8" 3/4" Hose O.D. 5/8" 3/4" Compression Fittings Female Thread 7/8" - 14 1-1/16" - 14 Part No. 142106 142107 Hose O.D. 5/8" 3/4" Hose O.D.
PIPE FITTINGS • Designed for low and medium Pipe Elbows Pipe Tees pressure applications Part No. 017003 017004 017005 017006 017013 Square Head Plugs Part No. 017061 017063 017065 017067 017069 017059 Pipe Size 1/8" 1/4" 3/8" 1/2" 3/4" 3/4" Material Plated Steel Plated Steel Plated Steel Plated Steel Plated Steel Brass Close Nipples Pipe Size 1/8" 1/4" 3/8" 1/2" 3/4" Material Brass Brass Brass Brass Malleable Iron 45 Street Elbows Part No.
PIPE FITTINGS (cont.) Pipe Cross Couplings Part No. 017073 Part No. 016067 016068 016069 016070 016077 Pipe Size 1/8" Material Brass Adapters Pipe Size 1/8" 1/4" 3/8" 1/2" 3/4" Material Brass Brass Brass Brass Malleable Iron Part No.
SAE 45 FLARE FITTINGS (cont.
TRUCK AND TRAILER REPAIR KITS Part No Description 690031 690033 690035 690037 690050 In-Cab Air Line Repair Kit - Push Lock Air Brake Line Repair Kit - Push Lock Nylon Tubing Repair Kit - Push Lock Transmission Air Line Repair Kit -Push Lock NTA Fitting Kit IN-CAB AIR LINE REPAIR KIT Part No 690031 24 Total Fittings 016162 016164 1/8 x 1/8 1/8 x 1/4 1/4 x 1/8 1/4 x 1/4 3/8 x 1/8 3/8 x 1/4 m. conn 016114 016112 m. conn m. conn m. conn m. conn 2 pcs. 2 pcs. 2 pcs. 1 pc. 1 pc.
FITTING ASSORTMENTS Large Air Brake Fitting Assortment Push-Lock Fitting Assortment Assortment includes the following Assortment includes the following Assortment includes the following part numbers and quantities plus part numbers and quantities plus part numbers and quantities plus rack part number 690090, P. 151 rack part number 690090, P. 151 rack part number 690090, P. 151 Total Fittings 583 Part No. 690059 Part No.
HOSE CLAMPS AND COOLANT VALVES Miniature/General Purpose Slotted/Liner/EuroSeal® Clamps • All clamps feature 300 series stainless steel bands • Miniature, general purpose and liner clamps include yellow dichromate slotted hex head screws.
HOSE CLAMPS AND COOLANT VALVES (cont.) Spring Loaded T-Bolt Clamps • Eliminates "cold flow hose leaks" • • • • T-Bolt Clamps • • FITTINGS • Belleville spring washer stacks should be nearly collapsed flat and the screw tip should extend beyond • 1/4". Using a torque wrench, tighten to recommended torque range. Constant-Torque® is a registered trademark of Breeze Industrial Products www.velvac.
HOSE CLAMPS AND COOLANT VALVES (cont.) Muffler Clamps/Saddle Clamps • Heavy duty clamp with round 3/8-16 • Zinc plated for corrosion protection • Complete with grade 2 serrated flange nuts • Individually packaged Part No. 022048 022049 022050 022051 022052 022053 022054 022055 Size 1.75 2 2.5 3 3.5 4 4.5 5 Part No. 022056 022057 022058 Size 4" 4.5" 5" Part No.
HOSE CLAMPS AND COOLANT VALVES (cont.) Turbo V-Band Clamps Hi-Torque® Clamps Nominal Clamp Diameter V-Insert Section • Heavy gauge housing engineered Band • Clamps connect vehicle exhaust pipe • All stainless steel construction flange to turbo or engine manifold • Clamps meet or exceed OEM • Built to withstand high temperatures specifications for material and produced by heavy-duty engines and quality standards turbos Clamp Dimensions (in.) Nominal Part No. (in.) A Applications D E B C 022470 3.82 .
CLEVIS AND CLEVIS PINS Clevis and Clevis Pin Kits Standard Clevis Pins H C A F E D A B G B • Each kit includes one yoke, clevis pin and cotter pin • Forged steel construction • Zinc-plated for corrosion resistance Nominal Size 1/4 5/16 3/8 1/2 1/2 1/2 5/8 5/8 *Includes 3/8" x 1/4" reducer busing and 5/8" - 18 hex nut Part No. 019057 019059 019061 019065 019067 019069 019071 019073 Clevis Universal Clevis Pins Part No.
Hose Support 125-127 Table of Contents D Hose Cable Support Accessories Pogo Sticks V Indicates a new product added to catalog NEW Indicates an original Velvac® product VELVAC Original Revised Part No. NOTE T V P A W D B Page F C Fax: Email: Indicates a revised part number S 800.783.8871 262.786.4101 sales@velvac.
HOSE AND CABLE SUPPORT ACCESSORIES Hose and Cable Suspenders Replacement Tracker Bar Kits Five year limited warranty! Tracker bar tender kits are designed to hold air lines and electrical cables to prevent kinks and abrasions during normal highway use KIT INCLUDES: • Molded of durable rubber components which remain • 16" or 20" Spring- plated for added corrosion flexible to -40˚ F • Will not stretch out or corrode like traditional steel • • • support springs Reduce damage to cab body paint 3/4" dia
HOSE AND CABLE SUPPORT ACCESSORIES (cont.) Hose Holders and Separators Part No. 580037 Part No. 580038 Part No. 580039 • ABS plastic construction Part No. 580040 Part No. 580037 580038 580039 580040 580041 Part No. 580041 I.D. 3/8" 3/8" 1/2" 1/2" 1/2" Description 2 Hose Separator 4 Hose Separator 2 Hose Separator 3 Hose Separator 4 Hose Separator Hose Support Springs Grab Handles • Springs support either air or vacuum lines • Heat-treated, zinc plated spring steel construction • 3/4" O.D.
POGO STICKS Pogo Sticks • • • • • Durable, zinc-plated steel bodies provide excellent support for air, vacuum and electrical lines Snubber chin assembly helps prevent pogo stick from coming in contact with cab Heavy-duty, polyester coated, oil-tempered steel springs can withstand 90 ˚ from vertical bends 5/8" - 11 stud and nut for extra support Heavy fabric hose holder strap included where pictured • NO SNUBBER CHAIN for use only when pogo stick is at least 24" away from cab Part No.
Fuel Systems 129-135 Table of Contents W Fuel Caps Anti Siphon Tubes Fuel Tank Valves Electric Fuel Tank Selector Valves V W Page OEM V F S L S Indicates a new product added to catalog NEW Indicates an original Velvac® product VELVAC Original Revised Part No. NOTE T V P A W D B F C Fax: Email: Indicates a revised part number S 800.783.8871 262.786.4101 sales@velvac.
Gas / Diesel Fuel Caps D Vented aluminum caps meet 49 CFR 393.67 requirements for vehicles built after October 1985. Vented brass caps are designed for use only on vehicles with non-vented fuel systems built prior to October 1985. Non-vented brass caps are designed for use only on vehicles equipped with properly vented fuel systems. For complete information on current fuel tank system requirements, see Code of Federal Regulations 49 CFR 393.67 A B C • Available in vented or non-vented feature.
FUEL FUEL CAPS (cont.) Aluminum Fuel Caps - Designed for Diesel Fuel Applications B H E C I D A G J F Aluminum Non-Locking Fuel Caps Part No.
Aluminum Locking Fuel Caps M O N P L Q K Part No. 600150 Photo K 600185-6*** L 600183-6*** M 600149 N 600169-6 600181-6 600173-6 O P Q Nominal Threads Across Threads Size Per Inch Description Cap Filler Neck 2.
FUEL ANTI-SIPHON TUBES Anti-Siphon Tubes Protect your fuel with Velvac's Anti-Siphon Tube • Makes siphoning fuel impossible• • • Part No. 600241 600242 600243 600244 600245 600246 Dimension "B" 3-3/4 inches 3-3/4 inches 2-3/4 inches 2-3/4 inches 2-1/4 inches 3-3/4 inches patented aluminum extrusion in the tube Durable design- made from 6061 aircraft aluminum tubing with a 0.
Crossover Fuel Line Safety Valve Technical Information Flow 4.0 gpm minimum at 1.0 psi differential pressure Leakage Prior to actuation: zero leakage up to 5.0 psi After actuation: maximum 1/2 oz. By weight up to 5.0 psi Actuation Tension: minimum 450 lbs; maximum 700 in.
FUEL FUEL TANK VALVES (cont.) Ball Valve Tank Cocks • Designed for fuel line shutoff in • • • • • Four-Way Part No 060001 or 060007 Three-Way Part No. 060004 Three-Way Part No. 060012 gasoline and diesel vehicles.
Six Port Motor-Driven Valve Fuel Solenoid Shut Off Valve (Not for marine use) • Designed for systems with • • • • • • • fuel or vapor return lines not for use with fuel systems operating over 30 psi Reduces the possibility of fuel returning to incorrect tank as valve remains in actuated position after power is disconnected Permits high closing pressures Can be used for biodiesel, vegetable oil and olive oil 12 VDC Operating temperature range of -40˚ to 180˚ F 3/8" supply lines, 5/16" return lines Weat
Accessories 137-141 Table of Contents T L Wiper Blades Tarp Straps Emergency Triangle King Pin Lock Document Holders HD Truck Radiator Caps Conspicuity Tape Mechanics Wire V V Page W P L Indicates a new product added to catalog NEW Indicates an original Velvac® product VELVAC Original Revised Part No. NOTE T V P A W D B F C Fax: Email: Indicates a revised part number S 800.783.8871 262.786.4101 sales@velvac.
ACCESSORIES WIPER BLADES PREMIUM UNIVERSAL WIPER BLADE: All makes PREMIUM heavy duty wiper blade replaces the Anco 91 Series heavy duty blade, featuring a riveted all steel frame and compression molded rubber blade for increased life and durability HIGH CURVE BLADE: Heavy duty blade used for highly curved windshield applications. HEAVY DUTY FLAT BLADE: Used in flat windshield applications. Stainless Steel rail. Typically used on heavy duty trucks, school buses, step vans and RV's.
ACCESSORIES (cont.) ACCESSORIES TARP STRAPS, EMERGENCY TRIANGLE, KING PIN LOCK Tarp Straps Emergency Triangle Kit • Made of molded rubber for ozone resistance and • • • • stretch resiliency Designed to hold tarp covers on trucks and trailers Hooks are crimped to prevent hook disconnection Straps will stretch up to twice their length Premium and DPM straps add increased UV protection Rubber Tarp Part No.
ACCESSORIES (cont.) DOCUMENT HOLDERS Standard Case with Bracket Light Duty Case with Bracket and CapKeeper™ Cable • Patented rubber caps create a watertight seal • Aluminum mounting bracket features cushioned tube supports and Mounting Bracket : 5-3/4" high x 2-13/16" wide x 4" deep Mounting Holes : (5) 3/16" diameter Tube Diameter : 1-5/8" pre-drilled mounting holes • CapKeeper protective cable secures caps to mounting bracket Part No.
ACCESSORIES (cont.) ACCESSORIES RADIATOR CAPS Heavy Duty Radiator Caps Velvac is now featuring All-Makes of Heavy Duty Truck radiator caps NEW Part No. 10205 10206 10208 10238 10308 Deep Neck 1" 1" 3/4" threaded filler neck 34" Pressure (lbs) 4 7 4 16 4 Part No. 10208 Part No. 10205 Part No. 10206 Part No. 10238 Part No.10308 • For Radiator Overflow Reservoir Systems Part No.10227 Part Nos.10228, 10229 10230, 10231 Part No.10233 Part No.10237 Part Nos.10241, 10242 Part No. 10327 Part Nos.
ACCESSORIES (cont.) CONSPICUITY TAPE, MECHANICS WIRE Conspicuity Tape Mechanics Wire ACCESSORIES Red and White Yellow Designed to mark the side and rear perimeter of trucks and trailers for enhanced visibility and detection DOT-C2 certified and guaranteed to meet or exceed all FMVSS 108 and NHTSA requirements • Alternates 11" of red and 7" of white • Superior daytime visibility and nighttime reflectivity • 3 year warranty Part No.
Safety Mirrors 143-145 Table of Contents Hemisphere Mirrors Observation Mirrors and Windows Lift Truck Mirrors Safety First! V Page P V OSHA Indicates a new product added to catalog NEW Indicates an original Velvac® product VELVAC Original Revised Part No. NOTE T V P A W D B F C Fax: Email: Indicates a revised part number S 800.783.8871 262.786.4101 sales@velvac.
SAFETY MIRRORS K-10® Hemisphere® Mirrors • Provides a bright distortion-free view of an entire area, allowing in-plant vehicles and/or personnel to move safely through the facility • 360 degree can be suspended from ceiling to see blind corners 360 Hemisphere • 180 degree for use in a 3-way "T" corridor and other areas where enhanced wide-angle viewing is required perfectly against the ceiling for superb visibility around blind corners 180 Hemisphere • Pendulum-style hanging kit is available for 30-42
SAFETY MIRRORS (cont.) K-10 Convex Observation Mirrors Full Round Indoor Mirror • Ideal wherever detailed observation and monitoring is required where employees and equipment cross paths.
SAFETY MIRRORS (cont.) K-10® Wall-Eye® Mirror Part No. 730116 Description 18" diameter, flush mount against the wall WE18 730117 18" diameter, ABS back includes adjustable mounting brackets WE18-HD K-10 Lift Truck Mirror • Reduces lift truck operator blind spots • Operator's image will not obstruct the view • Driver not only sees to the side and behind, but can also see the load directly in front Part No.
Retail 147-153 Table of Contents A S Mirror Display Electrical Connector Display Air and Fittings Displays Fittings Displays Bucket and Counter Boxes Hose Clamp and Air Hose Displays Sided Spinner Display Wiper Blade Display Bulk Floor Carton Displays Wire Rack Display Primary Wire Display V T A Indicates a new product added to catalog NEW Indicates an original Velvac® product VELVAC Original Revised Part No. NOTE T V P A W D B Page F C Fax: Email: Indicates a revised part number S 800.
DISPLAYS WITH PRODUCT ASSORTMENTS Mirror Assortment and Spinner Display NEW One of the proven methods to increase sales is displaying product. Velvac now offers a 3-sided spinner display complete with an assortment of popular mirrors designed to improve driver safety by reducing blind sports.
DISPLAYS WITH PRODUCT ASSORTMENTS Electrical Component Assortment and Spinner Display NEW • Assortment of the popular, high running electrical components • Butt and Ring Tongue Connectors • Quick Slide Connectors • Heatless Connectors • Fuse Holders and Fuses • Heat Shrink Tubing • Silicon Self-Sealing Tape • Electrical Tape • Crimping Tools • Cable Ties RETAIL • Includes • 65 popular, high running part numbers • Totalling 226 items • 3-Sided Spinner Display • Plan-O-Gram • 107 4" peg hooks Part No.
PRODUCT ASSORTMENT AND DISPLAYS (cont.) Air and Electrical Display Rack • Ships with an attractive Laminated Velvac Header • Designed for more flexible product sets • Bins are designed to accept dividers which increases storage possibilities • Display is formed from 16-gauge steel for strength and stability • Display is designed to hold up to 800 pounds • Easy to assemble • Ships with PLAN-O-GRAM Part No.
FITTINGS DISPLAY RACKS Brass Fitting POP Display • Designed for more flexibility and storage space • Choose from 3 different bin sizes layouts • Bins are designed to accept • • • RETAIL • Part No.
BUCKET AND COUNTER BOXES Fitting Assortments • Steel cabinet with rust-resistant baked enamel finish • Cabinet includes 18 drawer dividers and nine large steel drawers with "positive stop" feature, preventing drawers from being accidentally pulled out • Measures 17-1/4" W x 10-7/8" H x 11-5/8" D • Assortments come complete with all specified fittings, cabinet and drawer dividers Part No.
HOSE CLAMP AND AIR HOSE RACKS Slotted Hose Clamp Rack and Assortment • Sturdy, wall mount/counter rack • • ideal for displaying fast-moving miniature and general purpose hose clamps Assortment includes rack, header and 230 of the most popular slotted clamps Rack and header also sold separately Part No. 022566 022565 Description Hose Clamp Assortment with Rack and Header Rack and Header Only Assortment includes the following hose clamps: Part No.
FLOOR DISPLAYS Three-Sided Spinner Display NEW • Increase your sales opportunities by displaying product and letting • • • • your customers know what you have for sale Assembles in minutes - no tools required Stands 5ft tall (66" including the 3 Velvac header signs) Three 16" pegboad panels Rotating display stand Part No. 690104 Description Three-Sided Spinner Display Only Peghooks available separately Part No.
DISPLAY RACKS (cont.) Wire Display Rack • Feestanding or wall mountable display constructed of sturdy heavy gauge steel • Overall dimensions 16-1/2"H x 14-3/4"W x 6"D (header adds approximately 5-1/4" to height measurement) • 15 hooks to display your product Part No.
PART NO.
INDEX PART NO.
PART NO.
PART NO.
PART NO.
INDEX PART NO.
PART NO.
INDEX PART NO.
PART NO.
INDEX PART# Page PART# Page NOTES PART# Page PART# PART NO.
VELVAC VELVAC A ALong LongStanding StandingCommitment Commitment ToToCustomers Customersand andQuality Quality T TV V P P E E O O C C I V V A A V V I V V V V B B OEM OEM I I E E O OB BB B EDI EDI V V TS TS W W T T O O N N A A ISOISO V V N N B B WI WI R R M M C C In theInPassing the Passing Lane Since Lane Since 1934 1934
PRODUCT CATALOG VELVAC VELVAC WHAT WHAT DOES DOES ITIT MEAN MEAN TOTO BEBE ININ THE THE PASSING PASSING LANE LANE F F V V O O V V OEM OEM V V A VA V V V I In the Passing Lane Since 1934 P P L L IP S S C C N NB B W W T T F F P USAUSA P PN N TE TE R R WWW WWW VELVAC VELVAC COM COM SALES SALES VELVAC VELVAC COM COM
