Product specifications

AIR
E
B A
General
Information Feature # Feature/Benefit
Cylinde
r
Aluminum cylinder tubing with a 16 RMS
Construction finish, lock ring construction secures end
caps to tube
Front Cover Solid aluminum with oilight bronze bushing,
Delrin seal and 1/4" NPT port
Rear Cover Solid aluminum with mounting hole for 1/2"
clevis pin and 1/4" NPT port
Piston Cup Solid aluminum with Nitrile "O" ring rated at
-40 to 185 F and UHMW polyethylene
wear band
Piston Rod 5/8" diameter 303 series stainless steel
with 5/8" - 18 thread
Temp Rating -40 to 185 F
Pressure 10 psi minimum to 150 psi maximum
Rating Standard operating pressure 100 psi
AIR CYLINDERS
D C
Backed by a 3 year warranty
A
B
C
D
E
Velvac's heavy-duty Enforcer™
series of air cylinders are built
tough for long life and made from
some of the strongest materials
available today!
Machined from 6061 series
aluminum, 303 stainless steel,
with Nitrile "O" rings and a
UHMW polyethylene wear
band, they are the ultimate air
cylinder!
Cycle tested into the millions!
The solid construction means
they will keep on working even
in extreme conditions where
other air cylinders fail!
These cylinders are available
in push/pull, solenoid operated
and spring return versions that
will slam the door on the
competition!
Retracted Extended Thrust at Draw at
Part No. Cylinder Type Stroke 100 PSI
100204 Push/Pull
100226 Spring Return
100206 Push/Pull
100208 Push/Pull
100308 Push/Pull
100310 Bullet Type
NOTE: Air cylinders and tailgate kits are designed to operate the locking linkage on dump bodies and are NOT to be used as a
means of mechanically holding the tailgate shut. Custom kits are available - contact Velvac for more information.
Enforcer is a trademark of Velvac, Inc.
www.velvac.com 800-783-8871
8.68"
3-1/2" Air Cylinders
2-1/2" Air Cylinder
11.89"
13.89"
4"
6"
6"
8"
16.92"
13.89"
19.75"
Length Length
9.89"
13.75"
962 lbs
962 lbs
17.89"
21.89"
62
100 psi
491 lbs
251 lbs
491 lbs
491 lbs
930 lbs
930 lbs
460 lbs
460 lbs
24.28"15.60"
460 lbs
460 lbs
26.95"10"
Velvac's heavy-duty Enforcer™
series of air cylinders are built
tough for long life and made from
some of the strongest materials
available today!
Machined from 6061 series
aluminum, 303 stainless steel,
with Nitrile "O" rings and a
UHMW polyethylene wear
band, they are the ultimate air
cylinder!
Cycle tested into the millions!
The solid construction means
they will keep on working even
in extreme conditions where
other air cylinders fail!
These cylinders are available
in push/pull, solenoid operated
and spring return versions that
will slam the door on the
competition!