Product specifications

AIR

Backed by a 3 year warranty

High Lift Cylinder -

Made in the U.S.A.

General Information Feature/Benefit

Cylinder Tube Aluminum cylinder tubing with a 16 RMS finish

Front Cover Solid aluminum with oil tight bronze brushing, Delrin seal and 3/8" NPT port

Rear Cover Solid aluminum with mounting hole for 1" clevis pin and 3/8" NPT port

Piston Cup

Solid aluminum with Nitrile "O: ring rated at -40 ˚ to 185˚F and UHMW polyethylene wear band

Temp Rating 40 below to 185 above

Pressure Rating Standard operating pressure 100 psi 10 psi minimum to 150 psi maximum

Retracted Extended Thrust at

Part No. Bore Cylinder Type Stroke Length Length 100 psi Draw at 100 psi

100424 4" Push/Pull 24" 58.50"

Tailgate Cylinders - Made in U.S.A.

AIR CYLINDERS (cont.)

1,158 lbs34.50" 1,275 lbs

Backed by a 3 year warranty

• Velvac's Enforcer series of tailgate cylinders is the serious

choice for your tailgate

• Machined from 6061 series aluminum, 5/8" diameter 303

stainless steel shaft with 5/8" - 18 threads, Nitrile "O" rings

and a UHMW polyethylene wear band, they are the ultimate

Part No.100615

tailgate cylinder

• Direct replacements to Haldex and MGM

• These cylinders slam the door on the competition and keep it closed

• Standard operating pressure 100 psi 90 psi minimum to 150 psi maximum

Cylinder Retracted Extended Thrust at

Part No. Bore Type Stroke Length Length 100 psi Draw at 100 psi

100603 6" Spring Return 3" 16.18" 19.18" 400 lbs 2,400 lbs

100613 6" Spring Return 4.38" 18.62" 23" 1,417 lbs 1,400 lbs

100614 *Bracket Kit for 100613

100615 *Spacer kit for 100613

NOTE : Extended/retracted lengths are measured from the tip of the shaft to the end of the cylinder

*The bracket kit is used for new MGM installations, while the spacer kit is used when replacing the existing

MGM cylinder

www.velvac.com 800-783-8871

Part No.100603

Replaces Haldex

R3PT75

Part No.100613

R5A

Part No. 100614 Replaces MGM