Instruction manual

ROC800-Series Instruction Manual
4-20 Input/Output Modules Revised Jul-14
Figure 4-24. Pulse Output Wiring on APM
DIP Switch
Settings
The APM card’s daughterboard contains several DIP switches which
you use to control the module’s activities. See Figure 4-25 for the
switch locations and labels; see Table 4-3 for the settings.
Figure 4-25. DIP Switches on APM
Table 4-3. APM DIP Switch Settings
Switch Channel Side
1
Function Switch Position
1
S1 3 N/A
Standard PI Up
Current Modulated Densitometer Down
S2
1
Left
10 kΩ Pullup to 12 V dc
Up
Left No Pullup Resistor Down
2
Right
10 kΩ Pullup to 12 V dc
Up
DEVICE
EXTERNAL
CONTROL
NO CONNECTION
+12
10K
S2
S4
S1
S3
S5