Dishwasher Elise Installation Guide
12
13
INSTALLATION
• After installing one clip for each side, push the
dishwasher into the cabinet (Figure E).
• Note that while pushing the dishwasher into the cabinet, water supply hose
must move in the channel to the front (Figure F).
• Fix the second clip
(Figure G).
Water supply may be connected to the dishwasher in
one of two ways:
• With metal braided hose.
• With copper tubing.
WARNING
DANGER
CAUTION
FOR YOUR SAFETY
NOTICE
• Hot water supply line: Use minimum 3/8" O.D. cop-
per tubing or metal braided dishwasher supply line.
• Temperatures required for soldering and sweating
will damage the dishwasher's water inlet valve so if
any such operation is needed, keep the heat source
min. 7-7/8" (20.0cm) away from the dishwasher's
water inlet valve.
• There should not be any sharp bends in the water
line that may restrict the water ow.
• Teon tape or pipe thread compound must be used
for sealing the connection. Before connecting the
copper water supply line to the dishwasher, ush it
with hot water to clear any foreign material.
WARNING
DANGER
CAUTION
FOR YOUR SAFETY
NOTICE
After connections are made, turn on the water
supply to check for leaks.