Dishwasher Elise Installation Guide

• DO NOT operate the appliance if damaged, malfunctioning, partially disassembled, or if it has missing or

broken parts.

• Also follow the safety instructions of the use and care guide.

• To reduce the risk of electric shock, re, or injury to persons, the installer must ensure that the dishwasher

is completely enclosed at the time of installation.

• Only connect the dishwasher to the power supply when all installation and plumbing work is complete.

• If the dishwasher is installed in a location that experiences freezing temperatures (e.g. in a vacation home,

cabin, etc.), you must drain all the water from the dishwasher’s interior. Water system ruptures that occur

as a result of freezing are not covered by warranty.

• Dishwasher must be secured to adjacent cabinetry using the brackets provided. Failure to do this may

cause damage to property or bodily injury.

• Connect to a properly rated, protected, and sized power supply circuit to avoid electrical overload.

The dishwasher is designed for an electrical supply of 120V (volts), 60Hz (hertz), AC, connected to a

dishwasher-dedicated, properly grounded electrical circuit with a fuse or breakers rated for 15 amperes.

Electrical supply conductors shall be a minimum of #16 AWG copper wire rated at 167°F (75°C) or higher.

These requirements must be met to prevent injury and machine damage. Consult a qualied electrician if

in doubt.

• DO NOT use any extension cord or portable outlet device to connect the dishwasher to a power supply.

• Ensure that any plastic wrappings, bags, small pieces, etc., are disposed of safely and kept out of the

reach of children. Danger of suffocation!

• Remove the dishwasher door when removing an old dishwasher from service or discarding it. Ensure that

the appliance presents no danger to children while being stored for disposal.

• Old appliances may contain materials that can be recycled. Please contact your local recycling authority

about the possibility of recycling these materials.

IMPORTANTE - LEA Y SIGA LAS INSTRUCCIONES

INFORMACIÓN GENERAL

Herramientas que pueden ser necesarias

Llave de tubería Cortador de alambres

Taladro

Cinta para medir Destornillador Torx (T20)

Destornillador Phillips

Sierra caladora Martillo Pelador de alambres

Llave ajustable

Destornillador de ranura

Tijeras

Nivel Cepillo Lápiz