Dishwasher Elise Installation Guide

ManualsBrandsAGA ManualsAGA DishwashersAELTTDWSS AGA 24" Elise Fully Integrated Tall Tub Dishwasher with Smartsoil Sensor and Wave-Touch Controls - Stainless Steel

1

2

3

4

5

6

7

8

9

8

9

ENCLOSURE PREPARATION

Electrical Preparation

Preparation for Installing Mounting Brackets

WARNING

DANGER

CAUTION

FOR YOUR SAFETY

NOTICE

The dishwasher is designed for an electrical supply of 120V, 60Hz, AC, connected to a dishwasher-

dedicated, properly grounded electrical circuit with a fuse or breaker rated for 15 amperes.

WARNING

DANGER

CAUTION

FOR YOUR SAFETY

NOTICE

Dishwasher must be secured to adjacent cabinetry

using the mounting brackets provided. Failure to do

this may cause damage to property or bodily injury.

• Place the two mounting brackets into the top

corners of the dishwasher.

• Fix the mounting brackets (A) to the top

corners of the dishwasher, with the screws

supplied.

• Bend sides of mounting brackets (B) in order

to x from sides (if necessary).

Adjusting Height

If the height of the enclosure is 33-7/8" to 35-7/8"

(86.1cm - 91.1cm), adjust supports as shown in the

gure.