User and Care Manual

31
INSTALLATION
Check the appliance is electrically safe when you have nished.
Fitting the Bottom Panel (Toe kick)
1. Tilt the bottom of the panel slightly to locate the lower
slots onto the washers (Fig. 9.17). Now rotate the panel
to t over the pins (Fig. 9.18).
2. Using the two screws and allen key supplied, loosely
t the bottom panel onto the mounting brackets (Fig.
9.20). DO NOT tighten at this stage.
Nylon Locating
washer
Plinth
Pin
Side view at the front base of the cooker
Side panel
0
0
100
140
180
220
0
100
140
180
220
1
3 3
2 2
1
0
Side panel
Bottom panel
(Plinth / Toe kick)
Plinth
Side view at the front base of the cooker
Side panel
Fig. 9.17
Fig. 9.18
Fig. 9.19 Fig. 9.20
3. Adjust the bottom panel to set the gap between the
side panels and doors equally (Fig. 9.19). When it is
positioned correctly, use a suitable at open-ended
spanner to tighten the bracket screws, and then tighten
the bottom panel screws (Fig. 9.20) with the allen key
provided.
Toe kick
Toe kick
Side view at the front base of the range Side view at the front base of the range