Instruction manual

ELECTRICAL CONNECTION

• Remove the cover from the Field Wiring Com-

partment with a Phillips screwdriver.

• Feed the Power Supply Cable through the electrical

knockout. Connect the Power Supply Cable to the

rangehood cable. Attach the Power Supply Cable

grounding lead to the green screw provided. Attach

the White lead of the power supply to the White

lead of the rangehood with a twist-on type wire

connector. Attach the Black lead of the power sup-

ply to the Black lead of the rangehood with a twist-

on type wire connector.

• Replace the cover.

Chimney assembly

Upper exhaust Chimney

• Slightly widen the two sides of the upper chimney

and hook them behind the brackets 7.2.1, making

sure that they are well seated.

• Secure the sides to the brackets using the 4 screws

12c supplied.

Lower exhaust Chimney

• Slightly widen the two sides of the chimney and

hook them between the upper chimney and the

wall, making sure that they are well seated.

• Fix the lower part laterally to the hood body using

the 2 screws 12c supplied.

12c

2.2

2.1

Power supply cable

Green

Ground

screw

Ground wire