Owner's Manual

WARNING - TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK, OR INJURY TO PER-

SONS, OBSERVE THE FOLLOWING: Installation Work And Electrical Wiring Must Be Done By

Qualified Person(s) In Accordance With All Applicable Codes And Standards, Including Fire-Rated

Construction.

Sufficient air is needed for proper combustion and exhausting of gases through the flue (chimney)

of fuel burning equipment to prevent backdrafting. Follow the heating equipment manufacturer’s

guideline and safety standards such as those published by the National Fire Protection Association

(NFPA), and the American Society for Heating, Refrigeration and Air Conditioning Engineers

(ASHRAE), and the local code authorities.

When cutting or drilling into wall or ceiling, do not damage electrical wiring and other hidden utili-

ties.

Ducted fans must always be vented to the outdoors.

W A R N I N G

• Electrical ground is required on this rangehood.

• If cold water pipe is interrupted by plastic, no metallic gaskets or other materials, DO NOT

use for grounding.

• DO NOT ground to a gas pipe.

• DO NOT have a fuse in the neutral or grounding circuit. A fuse in the neutral or grounding

circuit could result in electrical shock.

• Check with a qualified electrician if you are in doubt as to whether the range hood is prop-

erly grounded.

• Failure to follow electrical requirements may result in a fire.

Warranty

One (1) year limited warranty on all parts and labor with the exception of

cosmetic damage to painted finish or plated surfaces.