Owner's Manual

EN
9
9
Mounting the hood body
• Hook the hood body onto the screws 12a.
• Fully tighten the support screws 12a.
Note: The Hood body should be secured to wall studs.
If necessary, install a wood support behind the dry
wall, flush mounted between 2 studs. This will provide
the necessary structure and support for mounting.
Connections
DUCTED VERSION AIR EXHAUST SYSTEM
When installing the ducted version, connect the hood to
the chimney using a rigid 6” duct.
• Install the damper 10 ø 6”.
• Fix the duct in position using sufficient pipe clamps
(not supplied).
10
DUCTLESS VERSION AIR OUTLET
• Push fit the air outlet fitting 15 onto the air outlet of
the hood body.
• Ensure that the activated charcoal filters have been
inserted.
15