AMLFDR23 owners guide

20
STORAGE FEATURES
Freezer Features
Stabilizer bar
Basket
retainer
clips
To Remove Upper Basket
1. Remove all items from basket.
2. Remove basket by pulling basket out to its full exten-
sion and lift out.
To reinstall upper basket, position basket onto the retainer
clips making sure the front of the basket rests in the retain-
er clips on the stabilizer bar.
Two freezer baskets
NOTE
NOTE
If basket is not resting on stabilizer bar retainer clips, the
drawer will not close properly.
Removing lower basket
Basket
retainer
To Remove Lower Basket
1. Remove all items from basket.
2. Remove the basket by tilting it forward and lifting it from
the retainer clips.
Spill Guard Tray should be hand washed in warm water.
Lower basket divider and
spill guard tray
Lower basket
divider
Spill guard
tray
Lift up on the rear of the lower divider and pull out.
Upper basket divider
Middle basket
divider
Retainers
Stabilizer
bar
Lift up on the rear of the lower divider and pull out.
Tilt Wire Shelf
The freezer tilt wire shelf (located on the inside of the freez-
er drawer) is not designed to be removed.
Dividers Removal
Lift up on the front of the upper divider and pull out.
Figure 43
Figure 44
Figure 46
Figure 45