Use and Care Guide

CONVERSION
Check the appliance is electrically safe and gas sound when you have nished.
23
Fig. 8.3
Fig. 8.4
Fig. 8.5
Valve Adjustment
Disconnect from the electricity supply.
Pull o all the control knobs, remove the bezels and control
panel.
Using a at headed screwdriver replace the bypass screws
with the screws from the LPG conversion kit. Be sure to save
the screws removed from the appliance for possible future
use.
Ret the control panel and control knobs.
Ovens
Remove the 4 xing screws on the toe kick panel. Hold the
bottom edge, lift up slightly and gently pull towards you.]
Remove the 2 screws holding the orice bracket (Fig. 8.3).
Locate the orice and remove using an adjustable wrench.
Replace with oven burner orice 132 for the main oven and
orice 110 for the small oven.
Reassemble in the reverse order.
Broiler
Remove the rear guard and cover.
Using a wrench hold the orice housing whilst removing the
nut. Remove the orice from its holder and replace with the
broiler orice for LPG (118).
Gas Regulator
The gas regulator is located on the bottom left hand side, at
the rear of the appliance.
Unscrew the cap from the front of the regulator housing
(Fig. 8.4). Unscrew the plastic insert from the cap, turn it
round and screw back into the cap (Fig. 8.5).
Reassemble in the reverse order.
Natural Gas LPG