Installation Guide

HOTCUPBOARD INSTALLATION

NOTE: The AGA TC5 hotcupboard should arrive with the top plate in a jacked up position. This

is to allow the complete appliance to be slid onto its plinth when alongside the AGA TC3 without

the top plate clashing. The hotcupboard top plate should then be wound down to its correct

height once the appliance is in its final position.

1. Detach hotcupboard from the plinth by removing two screws and tongue bracket from plinth

(See Fig. 6). Slide hotcupboard forwards and away from rear fixing bracket (See Fig. 7).

Fig. 6 DESN 516448

Fig. 7 DESN 516449