Specification Guide

Model # AHCIN
Width 19
3
/
8
"
Height
36"
Depth
27
1
/
2
"
1
3
2
Technical Specifications
Overall Dimensions
36”H x 19
1
/
8
”W x 27
1
/
2
”D
Cooktop Surface with Controls
16
1
/
2
”H x 14
1
/
2
”W
1.Ceramic Induction Burner
12”H x 12”W
Induction Defined Pan Area
9”H x 9”W
2. Simmering Oven
10”H x 13
3
/
4
”W x 20
1
/
4
”D
3. Slow Cook Oven
10”H x 13
3
/
4
”W x 20
1
/
4
”D
Weight
292 lbs
Shipping Weight
332 lbs
Electrical Requirements
240v, 40amp, 60Hz
Fuel/Power
Electric
Warranty 1 Year Limited Warranty
on all parts and labor
Shipping Instruction
Ships fully assembled
in separate carton
2
AGA Kitchen Concierge
1.800.525.5601
AGA Hotcupboard with Induction Top
Switching the Induction
Cooktop ON
Using the induction cooktop requires three steps.
1. Touch the power on - off pad
2. Touch the induction on - off pad and
3. Set the required power level
If power level is not set within 20 seconds the unit will
automatically switch off.
Setting the Power Level
This induction cooktop offers 10 levels of power the first
9 power levels can be selected by touching an individual
power level pad or by sliding your finger along the
pads. A visual indicator will illuminate as both a
numerical as a level display with a
representing high.
The 10th power level is achieved using the boost
function. To set the boost function, touch boost pad
the display will indicate . The boost function will run
for 10 minutes maximum before reverting back to
setting .
6
Fig. 3
Display
Cooktop Timer Set
Warming
Levels
Power
Level
Display
Induction
On-Off
Warm
Setting
Low
Power Level
Lock
Power
On-Off
Pause
Minute
Timer
Set
Timer Display
High
Boost
When the power is on and a power level is selected, the
pan detection will be automatic whenever the pan is
placed within or removed from the cooking zone on the
cooktop. (See Fig. 2 for defined pan area and Fig. 4 for
pan location).
If there is no pan placed on the cooking surface the
display will flash .
Always switch off by touching the power pad when
the cooktop is not in use.
Switching the Induction
Cooktop OFF
After use the cooktop should be turned off by touching
the power touch pad .
Pan Detection
Fig. 4
Residual Heat Indicator
The cooktop surface will get hot when in use, this is due
to heat being conducted from the cooking pan. The
cooktop surface will also remain hot for a while after
use.
After the cooking period the cooktop hot indicator will
be displayed and for a short period of time after power
off.
Pause
To interrupt the cooking period, touch the pause touch
pad , cooking will stop and will be displayed.
To recommence cooking, touch pause pad and then
slide your finger the full length of the power level pads,
through to the original power level will be
automatically set.
Pause remains active for 10 minutes only, after 10
minutes the cooktop will switch off.
9” x 9” Defined Pan Area
Control Panel
Induction Features
The large induction cooking surface features the following touch pad
controls on its ceramic surface:
• Power Boost
• Residual Heat Indicator
• 9 Power Settings giving instant response
• A Timer and Pause Feature
• Overheating Detection
• Child Safety Lock