User guide

AIMS HANDSET
11
Consumer Protection
AIMS HANDSET
Handset can be wall mounted as described below.
- Remove backplate from the rear of the Handset by sliding down with hand and away from the Handset (fig 10).
- Select the site for the handset and use the backplate to mark the position of fixing holes.
- Drill 6mm dia. holes with masonry drill for the rawplugs.
- Use rawplugs and screws supplied to fix the backplate to the wall (fig. 11).
- Stick the round self adhesive label supplied to the inside of the backplate to cover the fixing screw heads.
- Fit the Handset on to the backplate by locating the tag on to the slot in backplate as shown (fig. 12).
Fig. 10
Fig. 12
Fig. 11
NOTE: After several hours the heat indicator should be within the black band on the AIMS handset ‘INFORMATION’
screen. It may be necessary to adjust the temperature control knob to achieve this, allow the cooker to stabilise for at least
4 hours before attempting any further adjustment.