User guide

18
NOTE: If the AIMS handset is unused for an extended period of time, the display screen will automatically turn off to
conserve battery power.
REMEMBER: The handset is designed to be operated within the kitchen area.
Press firmly any button to turn the display back on, and the Information (Main Menu) screen is automatically displayed.
The AIMS Controller handset has four display screens:-
1. The Information (Main Menu) screen
2. The Date/Time Setting screen
3. The AIMS Programme screen
4. The Holiday Setting screen
See each section for details:-
The AIMS one or two programmable events.
The two events programme will enable the AGA to be at ‘Normal’ in the morning, (i.e. to cook breakfast) drop to a lower
temperature during the day, and return to ‘Normal’ in the evening (i.e. to cook dinner) and drop to ‘Slumber’ later in the
evening and throughout the night.
The one event programme will enable the AGA to drop to ‘Slumber’ during the night and return to ‘Normal’ throughout the
day.
This will be shown as ‘Once’ or ‘Twice’ on the AIMS programme screen. (See Fig. 19).
The ‘Normal’ temperature for those two events can be set using the cooker temperature control knob.
The modes in between the events can be set at ‘Low’ or ‘Slumber’ depending on the personal preference.
If a mistake is made when setting the date or time on any of the screens, use the button to go back to the previous
setting.
When the button is pressed the oven vent fan will be switched on and a blue light will appear.
Selecting a Handset Language
Language options are selected during the Handset to Base Unit Signal Check/Language Selection procedure, see Page
24.