Technical data

Handset can be wall mounted as described below.
- Remove backplate from the rear of the Handset by sliding down with hand and away
from the Handset (fig 13).
- Select the site for the handset and use the backplate to mark the position of fixing holes.
- Drill 6mm dia. holes with masonry drill for the rawplugs.
- Use rawplugs and screws supplied to fix the backplate to the wall (fig. 14).
- Stick the round self adhesive label supplied to the inside of the backplate to cover the
fixing screw heads.
- Fit the Handset on to the backplate by locating the tag on to the slot in backplate as
shown (fig. 15).
AIMS HANDSET
Fig. 13
Fig. 15
Fig. 14
13