User guide

Fig. 8
11
DESN 515271
The handset has 10 buttons and a display screen.
NOTE: If the AIMS handset is unused for an extended period of time, the display screen will
automatically turn OFF to conserve battery power. The controller is designed to be operated
within the kitchen area.
Press firmly any button on the handset to turn the display back on, and the Information (main
menu) screen is automatically displayed.
The AIMS Controller handset has four display screens:
1. The Information (main menu) screen
2. The Date/Time setting screen
3. The AIMS Programme screen
4. The Holiday Setting screen
See each section for details.
The AIMS has one or two programmable events:
The two events programme will enable the Aga to be at ‘Normal’ in the morning, (ie to cook
breakfast) drop to a lower temperature during the day, and return to ‘Normal’ temperature in the
evening (ie: to cook dinner) and drop to ‘Slumber’ later in the evening and throughout the night.
The one event programme will enable the Aga to drop to ‘Slumber’ during the night and return
to ‘Normal’ throughout the day.
This will be shown as Once or Twice on the AIMS programme screen. (See Fig. 11).
The ‘Normal’ temperature for those two events can be set using the cooker thermostat.
The modes in between the events can be set at ‘Low’ or ‘Slumber’ depending on personal
preference.
If a mistake is made when setting the date or time on any of the screens, use the back button
to go back to previous setting.
When the oven vent fan button is pressed the oven vent fan will be switched on and a blue
light will appear.
SELECTING HANDSET LANGUAGE
Language options are selected during the Handset to Base Unit Signal Check/Language
Selection procedure, see page 16.