Technical data

4
TECHNICAL DATA - AGA EC3 (3 Oven)
Fig. 1 DESN 514194
ABCDFGHKLMN
RT
mm 987
889 851 679
1330
756
1125 3
698 484 816 116 52
* THIS HOLE IF REQUIRED FOR OVEN VENT PIPE IS TO BE CUT ON SITE IN THE LEFT OR RIGHT HAND SIDE
PANEL.
PLEASE NOTE: SIDE CLEARANCE DIMENSION R IS ALSO REQUIRED ON THE LH SIDE FOR THE BAKING OVEN
DOOR.
COOKER DIMENSIONS
When surveying for a cooker installation the actual clearance required for the ‘body’ of the appliance should be increased
overall by 10mm beyond the figures quoted. This allows safe margin to take into account the natural dimensional variations
found in major castings. In particular the width across the appliance recess could be critical.
V
790
W
873
XYZ
55 699 662
FOR WALLS EXTENDING BEYOND THE FRONT OF THE COOKER