Technical data

19
SERVICING  WARNING
Disconnect from electricity before servicing. Check appliance is safe when you have finished.
12. To Change Cooktop or Broiler Controller
Lift up the ceramic hob top (see 4). Remove control
panel (see 8). Disconnect wiring from controller – make
a note of the wire colors and terminal connections.
Refer to the wiring schematic.
Remove 2 screws holding controller to mounting panel.
Fit new controller and reassemble in reverse order.
Check that the wiring is correct as shown in the wiring
schematic.
Check for correct operation.
13. To Remove an Oven Door
Door is heavy - take care.
Open oven door and remove Handyrack (where fi tted)
by springing one side out of the bracket on the door
and sliding the other side free.
Loosen the two top hinge screws.
Support the weight of the door and remove the screw
nearest the hinge pin. Swing the hinge up and away
from the hinge pin on the door.
Lift the door away from the bottom hinge.
Re-assemble in reverse order.
When replacing the door ensure that the nylon hinge
bush is in position between the hinge pin and the
hinge bracket at the both the bottom and top.