Operating instructions

11
GLASS
1. How to clean:
The glass will clean itself when there is sufficient
heat generated by burning fuel. If a build-up of cre-
osote occurs on the glass it may be due to draft con-
ditions, poor quality fuel or very slow burning for
along time. Only clean glass when the stove is thor-
oughly cooled. Clean with a liquid detergent taking
care not to scratch the glass.
2. Glass Replacement: (See Fig.10)
a. Open the door fully.
b. Remove the four corner screws and clips and
carefully remove the broken glass.
c. Clean the glass recess in the door.
d. Attach adhesive thermal tape to the perimeter of
the replacement glass.
e. Place the thermal tape side of the glass into the
door recess and replace the four corner clips.
f. Tighten screws.
g. Replace glass only with ceramic glass 5mm thick.
Fig.10
SUMMER SHUTDOWN
For summer shutdown of the stove, ensure all ashes
have been cleaned from the ash compartment and
that the air control is fully open, to avoid condensa-
tion in the stove firebox and possible corrosion dur-
ing this shutdown period.