Installation Manual

Fig. 6A DESN 516276
MODULE PLINTH
BASE
3
/8” (11mm)
HEIGHT
DIFFERENTIAL
HOTCUPBOARD
PLINTH BASE
11
/64” (4.5 mm)
GAP
FOR AGA TC5/DC5 + MODULE ONLY
6. Attach Module plinth to the AGA Total/Dual Control plinth using 2 M6 screws and washers provided (See Fig. 7 or 7A).
Slide front jointing bracket into place over two pot magnets, locking the two appliances together.
Fig. 7 DESN 516852
FOR AGA TC3/DC3 + MODULE ONLY
13