User Instructions

Getting started
When switching on the AGA cooker for the first few times,
there are two things you may notice, neither of which should cause
concern.
The AGA cooker will emit an odor for a short while, this is simply
due to the protective oil we put on the hotplates and ovens
burning off. Due to the newness in the first couple of hours, it is
advisable to open the kitchen window while this takes place.
Condensation may occur on the top and front plate whilst the AGA
cooker is heating up, caused by the internal insulation drying out.
The condensation should be wiped away as soon as possible to
prevent staining the enamel.
Your AGA Total Control has the external appearance of a classic AGA
heat storage enamelled cast iron cooker. However its flexibility is
almost unbounded because in place of a single heat source each
cooking zone has its own electrically heated cast iron element(s). The
separation of cooking zones, allows a choice of control. You are able
to select only those zones that you want, or need, to use.
The control panel is situated behind the top left hand door. It
contains touch sensitive buttons with a green or orange light (LED
indicator) to indicate which zone is activated. An audible beep will
confirm selection. There are eight buttons:
Standby/ON
Mode
Manual Slumber AUTO AUTO/Slumber selection
Boil (Boiling plate)
ON/OFF
Simmer (Simmering plate)
ON/OFF
Roast (Roasting oven)
ON/OFF or selected for AUTO or AUTO/Slumber
Bake (Baking oven)
ON/OFF or selected for AUTO or AUTO/Slumber
Simmer (Slow cook oven)
ON/OFF or selected for AUTO or AUTO/Slumber
HOW TO USE YOUR AGA TOTAL CONTROL
8