User manual

[e-mail] Page | 34 1-800-930-0949
5) Once you have the information about your network, on the wireless settings page, enter the
information about your wireless network into the fields. You can see our example below:
Make sure your camera has the wireless antenna plugged in. Push Submit to save the settings. The
camera will start to countdown as it needs to reboot. Once it has come to a stop, you can unplug the
Ethernet cable and you should start to see the green LED on the back of the camera flashing much faster
after about 30 seconds. Open IP Camera Tool again and the camera should appear. It may be operating
under a different IP address than what you had set before. Make sure to set a static IP address for the
camera again just in case.
6.6 – ADSL Settings
You can connect the camera to the internet through ADSL directly. If you are using this method of
installation, you can use this page to enter the ADSL username and password provided by your ISP.