User manual

[e-mail] Page | 40 1-800-930-0949
6.11 – FTP Service Settings
This feature allows for FTP services to work with the Foscam camera. Using the FTP feature allows
images to be uploaded to an FTP whenever motion is detected.
You can enter your FTP server details in the above settings page, enter your FTP server, port, and
upload folder. We recommend using your own FTP or a third party FTP service like www.cameraftp.com
which we are using in the above screenshot.
For the FTP Upload Folder, make sure you create this folder yourself, as the camera is not able to create
folders on the FTP. Also make sure the folder can be erased.
FTP Modes supported are PASV and POST modes, check with your FTP to see which mode it uses.
The feature named Upload Image Now will upload images when this box is checked. If the box is not
checked you will not receive any uploads.
Enable Set Filename allows you to set a name for the uploaded image files, if you select this, the
uploaded images will be named after the specific filename you set in the box below this.
Filename allows you to fill in the name of the uploaded image to a specific name you would like to
choose. This name is different from the alarm images that are uploaded; the alarm image names cannot
be changed.
The Upload Interval refers to the time between the current image and the next image that will be
uploaded.
Click Submit to save settings. Once you submit it you can click Test, which will show if the test succeeds.