User manual

[e-mail] Page | 46 1-800-930-0949
6.15 – Backup & Restore Settings
This page allows you save your current settings in case you are going to hard reset the camera and lose
your current settings to factory settings. If you back up your settings this way, you can hard reset the
camera, come back to this page, and restore the settings so that you will have the camera back just as it
was.
If you click the “Submit” button next to “Backup.” The camera will create a backup file that your computer
will automatically download, called “params.bin.”
This is the backup file. If you would like to restore the camera back to these parameters, click “Choose
File” next to the Restore field, and browse to the location of the file. Choose it, and then click “Submit.”
The camera will submit the parameter information and will restore your settings from the file.
6.16 – Restore Factory Settings
Clicking on “Restore Factory Settings” in the administrative panel will prompt you if you would like to reset
the camera back to default factory settings. This is similar to hard resetting the camera where the camera
will lose all of its current information. Click “OK” to restore the camera back to default factory settings.
6.17 – Reboot Device
Clicking on “Reboot Device” in the administrative panel will prompt you if you would like to reboot the
camera. Once you click this, you will be prompted to confirm rebooting the camera. Click “OK” to reboot
the camera, which will take a minute or so. The camera should come back online after this period of time.