TABLE OF CONTENTS DIRECT READING GRADE RODS (PAGES 3-8) BASIC ALUMINUM GRADE RODS (PAGES 10-11) DETECTOR BRACKETS (PAGES 13-21) ALUMINUM TRIPODS (PAGES 22-25) POWER CONVERTER (PAGES 26-27) LONG RANGE ALIGNMENT LASERS (PAGES 29-33) ROAD MARKING GUIDANCE LASERS (PAGES 35-37) WING PLOW GUIDANCE LASERS (PAGES 39-41) AUTOMATIC LEVELS (PAGES 42-43)
INTENTIONALLY LEFT BLANK
Direct reaDing roDs d e a l e r P r i c e l i s t • J a n u a ry 2 0 0 9 D i r ec t r e a D i n g ro Ds & a c c es s o r i es any combination within each category qualifies for quantity pricing item (new) (new) laser roDs GR1000 GR1000T GR1000I GR1000ICF GR1000IT GR1000M GR1000MCF GR1450 GR1450t GR 2000t GR1450M GR1450MCF 10 foot • tenths plus cut/fill 10 foot • tenths 10 foot • inches 10 foot • inches • cut/fill only 10 foot • inches • tenths 3 meter 3 meter plus cut/fill 15 foot • tenths plus cut/fil
Direct reaDing roDs h i g h e st q u a L i t y - L a rg e st s e L ec t i o n Laser/oPtic aL toug h — Lig htweig ht — Versati Le b u i Lt i n r e D m o n D, o r eg o n u. s . a F e atu res aluminum front and rear rods. Made of high strength clear anodized aluminum for lightweight, rugged, dependable operation. They will not rust, split, splinter, swell or warp in any environment. tape has heavy duty matte textured face. Easy on the eyes in bright sunlight. Protects the tape numbers from wear and fading.
Direct reaDing roD moDeLs the Largest seLection aVaiLabLe For Laser or oPticaL instruments! Laser roDs gr1000: 10-foot • tenths plus cut/fill gr1000mcF: 3-meter plus cut/fill gr1000t: 10-foot • tenths gr1450: 15-foot • tenths plus cut/fill gr1000I: 10-foot • inches gr1450t: 15-foot • tenths gr1000IcF: 10-foot • inches • cut/fill only oPticaL roDs 4 -Foot roD extension Works with any Laserline Direct Reading Rod! carrying/ storage bags (new) gr 2000t: 20-foot • tenths gr1000It: 10-foot • inches
GR1000 SERIES GRADE ROD EXPLODED VIEW x MAY 2009 24 4 10 16 9 12 8 2 6 21 14 15 17 18 13 2 22 19 23 2 4 1 3 7 5 17 2 25 2 13 2 8 2 20 11 24 4 6
TAPE CONFIGURATIONS ROD 10ft 10ft 10ft 10ft 15ft 10ft 15ft 3M 3M 5M 5M TAPES (ITEM 5) PART NUMBER DESCRIPTION 1000-1026 10THS/FULL FACE 1000-1036 INCHES/CUT & FILL 1000-1037 INCHES/10THS 1000-1038 INCHES/FULL FACE 1000-1501 10THS/CUT & FILL 1000-1023 10THS/CUT & FILL 1000-1504 10THS/FULL FACE 1000-1024 METRIC/FULL FACE 1000-1035 METRIC/CUT & FILL 1000-1502 METRIC/FULL FACE 1000-1503 METRIC/CUT & FILL HOUSING & RAIL CONFIGURATIONS 10FT ITEM 1 REAR HOUSING 1000-1020-10 RETAIL PRICE $45.
rod extension new 4 - fo ot ro d e x t e n s i o n w o r ks w i t h a n y g r s e r i e s ro d ! Image: shows rod extension fully collapsed Image: shows rod extension fully extended to 4’ f e atu res slides conveniently inside the rear rod when not in use allows you to extend the rod in one-foot increments up to four additional feet! 10-foot rods become 14 -feet, and 15-foot rods become 19-feet. remember! for each foot you raise the rod—reduce or run the tape down one foot.
INTENTIONALLY LEFT BLANK 9
NEW! A lu m i n u m G r A d e ro d s D e a l e r P r i c e l i st • O c tO b e r 20 0 5 10 Foot rod (9.8’) with two pull-out sections. Lower rod face width is 1-3/4” wide tapering to 1-1/2” wide at top section. Scale is silk screened onto a recessed face to protect the numbers. Locking pins are aluminum for long life. Carrying bag is heavy duty cordura with velcro flap fastener and a carrying strap. item retAil deAler ar10 I (Inches) 10’ Rod with Bag $45.00 $26.
A R Ro d P a rt s L i s t • 2 0 0 8 10 f 0 0 t Ro d 16 f 0 0 t Ro d AR104 ARB10 ARB AR166 ARB16 ARB top cap Bag, 10 footRod Button top cap Bag, 16 foot Rod Button AR101 AR102 AR103 AR161 AR162 AR163 AR164 AR165 Section Foot External guide Section Internal guide External guide Section Top cap Internal guide Section Foot External guide Section Internal guide External guide Section Internal guide External guide Section Internal guide External guide Section Top cap Internal guide W
INTENTIONALLY LEFT BLANK 12
DETECTOR BRACKETS MAY 2009 item retail 1-12 12+ 13
d e a l e r P r i c e l i s t • J a n u a ry 2 0 0 9 D etecto r brac kets bracket retail 1-5 6-10 11+ B-1 B-2 B1-LA B1-T B1-T3 B-550 B1-LS70-80 B-STorm B-LT UB-1 65.00 90.00 65.00 65.00 75.00 95.00 69.00 69.00 75.00 75.00 46.80 64.80 46.80 46.80 54.00 68.40 49.68 49.68 54.00 54.00 39.00 54.00 39.00 39.00 45.00 57.00 41.40 41.40 45.00 45.00 35.75 49.50 35.75 35.75 41.25 52.25 37.95 37.95 41.25 41.
Direct reaDing roD D etecto r to B rac ket matc h g u i D e Detector BranD & moDel AGL LS-4 B-1 B-2 B1-la B1-t B1-t3 B-550 3 B1-lS70-80 B-Storm B-lt 3 uB-1 3 AGL LS-100 3 3 AMA D6, D7 3 3 Apache 34, 44 Lightening 3 3 Apache Lightening 2, Twister 3 Apache Storm 3 CST Berger LD100, 120, 200, 400 3 David White LD18 3 3 3 3 Futtura CR1 3 Futtura CR2+ 3 Laser Alignment 4, 5, 6, 7, 8 3 Laser Reference (Pro Shot) 4-5-7 3 3 3 3 3 Laser Reference R-8 Leica LPD 15, 30 3 3 3
B1 Bracket PARTS LIST x MAY 2009 Item8 AMA: D6, D7 Apache: 34, 44 Lieca: LPD15, 30 Nikon: LS6 Pro Shot: R8 Quadriga cy10 Spectra Physics: 1275, 1274 Package containing 1 of each: Items 6,7,& 8 order P/N 1100-1201 6 7 1 Item 6 Laser Alignment 5,6, 7, 8 1/4-20 8 10-32 6MM Item 7 Laser Reference Pro Shot: R4, R5, R7 Item 7 Topcon: LS-30, LS-50, LS-70 David White Locating Hole for: LD-18 Item8 David White LD-18 Item8 Sokia: LR100 Item8 Nikon: DS-30 Item 6 AGL: LS-4 Laser Alignment: RE- 4 Nikon: 3 Spe
B2 Bracket PARTS LIST x MAY 2009 1 2 3 Item QTY. 1 1 2 1 3 1 PART NUMBER B-1 Brkt 1100-1100 0000-1116 DESCRIPTION B1T SP Bracket (Modified) SCREW, 10-32 x 3/8 PHFLT SS 17 Retail Price 65.00 40.00 .
INTENTIONALLY LEFT BLANK 18
U B -1 U N i v E r s a l B r a c k E t wo r ks w i t h j us t a bo u t a N y d E t E c t o r o u t t h e r e ! ! W E N the UB-1 Universal Bracket U.S. Patent No.
UB1 Universal Bracket PARTS LIST x MAY 2009 2 4 2 1 9 8 6 5 7 3 Item PART NUMBER DESCRIPTION QTY 1 2 UB-1 1100-1600 Bracket, Universal Reciever UB-1Rev. 1 Support Slide, Top 1 1 3 1100-1601 Support Slide, Bottom 1 4 5 0000-1116 0000-1801 SCREW, 10-32 x 1/2 PHPH SS Spring, Comp. od .360 id .280 wire .038 2 1 6 1000-1017 Knob, B1/B2 Lock 1 7 1100-1500 Lock, Bracket 1 8 9 0000-1142 1100-1602 SCREW, 1/4-20 x 1.
UB1 Universal Bracket SETUP INSTRUCTIONS x MAY 2009 Figure 1 Back view Top screw Not Used Bottom screw Top slide Figure 2 Figure 3 Shown Not aligned Shown aligned Detector, strap, top and bottom slides all slide up or down to allow best position for securing most brands of detectors Bottom slide 1. Loosen screws and spread top and bottom slides apart to make room for detector (Figure 1) 2. Place detector in bracket.
Tri pods AT 6 5 s e r i e s HeAvy duTy Aluminum AT65-F FlATHeAd & AT65-d domeHeAd F e AT u res 5.5 inch head 10.5 lbs (14 lb shipping weight) durable cam lock leg clamps replaceable feet and foot-tips extends from 40.5 to 65” 1810 SE First Street, Suite H, Redmond, OR 97756 • Phone 541 548 0882 • Fax 541 548 0892 • www.LaserLineMfg.
tripods P r i c e L i s t • J a n u a ry 2 0 0 6 at 65 s e ri es F e at u r e s Heavy duty (14 lb shipping weight) aluminum tripod 5.5 inch head durable cam lock leg clamps extends from 40.5 to 65” item AT 65F Flat head replaceable feet and foot-tips retail 1-12 $120.00 $39.95 $39.95 Includes custom decal for each tripod (See below) $39.95 $39.95 Includes custom decal for each tripod (See below) AT 65d dome head $120.00 dd 25 Logo decal $35.
T r i po ds P a rt s L i s t • 2 0 0 8 at4002 Bushing at3006 Hinge Plate GB93 at4006 Washer Top Cap at3002 GB818 Plate Screw at3001 at6005 Hinge Clamp Round Leg Right GB971 Washer at7004 Strap Assembly GB972 at6004 Bolt Leg at6001 at3003 Shifting Arm Bolt at6003 Shifting Arm at4007 Instrument Fastener GB99 Round Leg Left Nut GB100 Washer at5002 Plumb Bob Hook at6006 at7006 Lever Bolt Plug at5003 Front Clamp GB98 GB897 Bolt Washer GB896 Retainer Ring GB898 Nut
AT-65 PARTS LIST • MAY 2009 PARTS LIST PART# AT3001 AT3002 AT3003 AT3004 AT3005 AT3006 AT4002 AT4005 AT4006 AT4007 AT5002 AT5003 AT 5004 AT6001 AT6002 AT6003 DESCRIPTION HINGE CLAMP HEAD PLATE SHIFTING ARM FOOT LEG GUIDE HINGE PLATE BUSHING CLAMP LEVER LEG TOP CAP INSTRUMENT FASTNR PLUMB BOB HOOK FRONT CLAMP REAR CLAMP BOLT, SHIFTING ARM TIP, FOOT ROUND, LEG, LEFT PRICE 1.00 15.00 1.50 5.00 1.50 6.00 .50 .25 4.00 4.00 1.00 1.75 1.75 1.00 .75 3.
P o w e r c o n v e rt e r s P r i c e L i st • 20 0 8 F e atu res overvoltage protection short circuit protection runs laser from 90 to 260 VAc compact: 2 1/4 x 3 x 6 1/4” item retail 1140-1 $275.00 1140-2 $275.00 1140-3 $295.00 The 1140 Series Power Converters will run your laser at 13VDC with 90 to 260 VAC.
Powe r Converters 114 0 s e r i e s F e atu res The 1140 Series Power Converters will run your laser at 13VDC with 90 to 260 VAC. The 1140 senses what voltage it is hooked up to and automatically runs the laser on that voltage. overvoltage protection M o d e ls short circuit protection 1140-1 With three-pin jack connector to laser runs laser from 90 to 260 vaC Compact: 2 1/4 x 3 x 6 1/4” The 1140 converter is compact and tough, and should give you years of trouble-free operation.
INTENTIONALLY LEFT BLANK 28
lo n g r a n g e l a s e rs D e a l e r P r i c e l i st • a P r i l 20 07 lo n g ran g e l as e rs & ac c ess o ri es item retail discount dealer price LR-1050DD 5/10 Second Digital Laser Theodolite $5,995.00 25% $4,496.25 T-2000SD Transiting Base Laser $3,995.00 25% $2,996.25 T-2000SDG Transiting Base Laser $5,995.00 25% $4,496.25 2000-0035 Fan Lens, Swing-Away $395.00 25% $296.25 2000-0630 Tribrach, Optical Plummet $395.00 25% $296.25 2000-0620 Adapter, Tribrach $75.
LR1050DD Long Range aLignment Digital laser theoDol ite The ultra versatile and compact LR1050DD can back site as well as turn horizontal and vertical angles down to 5 arc seconds while delivering the maximum allowable 5 milliwatts of laser power to your forward target. This gives you the power and precision to tackle the toughest long range alignment applications.
typical Jacking pit or micro tunneling setup typical marine alignment application The LR1050DD allows you to pick up centerline at top of pit, both at the front and rear, to wiggle in for precise line control. Once line is established, the LR1050DD is set to grade, giving you both line and grade for your operation. The LR1050DD used with a fan lens allows you to back site to pick up centerline, or turn a precise angle for centerline.
t2000SD long range alignment laSer t u n n e l i n g l a S e r • m i n i n g l a S e r • o f fS h o r e D r e D g i n g l a S e r c o nveye r a li g n m e nt l aS e r • c e nte rli n e c o ntro l l aS e r th e lo n g ran g e S o luti o n Vertical lock with "compression shoe" tightening — stays in place Ultra stable built-in base for laser with dual vertical axils for maximum stability 5MW laser with special optics for maximum brightness and range Ultra fine 64 pitch vertical adjustment Power connector
acc eSSo rieS Scope Package 2000-0625 Fan Lens 2000-0035 Tribrach Adaptor 2000-0620 Tribrach with Optical Plummet 2000-0630 T-2000SD components: Spotting Scope 2000-0525, Fan Lens 2000-0035, Adapter 2000-0620, Optical Plummet Tribrach 2000-0630 T-2000SD shown with Spotting Scope 2000-0525, Optical Plummet Tribrach 2000-0630, Adapter 2000-0620 Spotting Scope 6-24x 2000-0525 laSer Spot Size chart Variable power from 6-24x objective diameter is 40mm.
INTENTIONALLY LEFT BLANK 34
G L3000 Se rieS Guidanc e L aSe rS G L30 0 0 P & G L30 0 0 Pm Highway paint striping, asphalt distributors, road wideners, pavement profilers, or virtually any application requiring vehicle line control. P r i c e L i s t • W i n t e r 20 0 8 G u i d a n c e L aS e rS & a c c eS S o r i eS item Price GL3000P remote control Paint Stripe Laser complete $5,995.00 3000-0004 Extra Control Box (P) with 19’ Control Cable $395.00 3000-0006 Control Box $280.00 3000-0008 19’ Control Cable $115.
G L 3000 se r i e s G u i da n c e L ase rs G L30 0 0 P & G L30 0 0 PM • HigHwAy PAint StriPing • ASPHAlt DiStributorS • roAD wiDenerS • PAveMent ProfilerS • or virtuAlly Any aPPLication requirinG VehicLe Line controL the GL3000 series Guidance Lasers use an ultra high visibility green laser to establish visual line control.
the adVantaGes • For truck control, you can set your reference 20 to 30 feet out in front of the vehicle impacting on the road. For gun package control the laser is used to give the Operator “heads up” time to move the gun package in and out for easy and precise alignment. • You are looking in your natural driving field of view at the reference point. • You can reduce or eliminate pre-marking and the high cost associated with it.
INTENTIONALLY LEFT BLANK 38
NEW! Wing PloW guidance laser The GL3000PMC is a versatile all weather product that can also be used for guiding highway paint stripers, asphalt distributors, pavement profilers, or virtually any other vehicle or equipment requiring line control. Use it in the winter and summer for all your guidance needs. P r i c e L i s t • W i n t e r 20 0 8 GL3000PMc Laser systeM incLudes: off as well as the deicing and automatic air blast functions.
! W e The NeW gl3000PMC guidaNCe laser for N WiNg PloWs lets you know where your wing plow trailing edge will be before you get there! Patent Pending Laser guide-spot as seen from cab, showing the future path of the wing plow trailing edge (as indicated by the dotted line). the safer wAy to plow! Avoid costly property And plow dAmAge. reduce downtime. 1810 SE First Street, Suite H, Redmond, OR 97756 • Phone 541 548 0882 • Fax 541 548 0892 • www.LaserLineMfg.
WiNg PloW guidaNCe laser GL3000PMC Guidance Laser mounted under headache rack Laser spot showing future path of trailing edge GL3000PMC “ultra-bright” green laser shown Patent Pending The sysTeM the gl3000pmc guidance laser uses an “ultra-bright” green laser spot to establish wing plow trailing edge location before you get there. the laser spot impacts on the road/ snow surface ahead of the truck and shows the driver where the wing plow trailing edge will be.
Leve ls A l S e r i e s A u to m at i c L e v e l Level and tripod package shown AL Specifications Magnification Aperture Working Range Level Accuracy Angle Accuracy Dimensions Weight Tripod Connecting Size AL20 20X 30mm 200’ 1/8” @ 100’ 1º 7.5 x 5.1 x 5.35” 3.96 lbs 5/8 x 11 AL24 24X 36mm 300’ 1/16” @ 150’ 1º 7.5 x 5.1 x 5.35” 3.96 lbs 5/8 x 11 AL28 28X 36mm 400’ 1/16” @ 200’ 1º 7.5 x 5.1 x 5.35” 3.
leve ls D e a l e r P r i c e L i s t • Ap r i l 20 0 5 A L s e ri es auto mati c leve L Fe atu res Ultra-bright clear optics Rugged metal housing Wire hung air-dampened compensator Continuous tangent screw on both sides of instrument Constant stadia Horizontal circle for turning angles item Mounts to flat-head or dome-head tripod List Dealer cost - Any quantity AL 20X-D $295.00 $147.50 AL 24X-D $325.00 $162.50 AL 28X-D $355.00 $177.
INTENTIONALLY LEFT BLANK 42
