Product Manual
AGD 326
AGD 326
PEDESTRIAN ON-CROSSING DETECTOR
AGD 326
PEDESTRIAN ON-CROSSING DETECTOR
AGD 326
PEDESTRIAN ON-CROSSING DETECTOR
11
Installation and Commissioning
USER INTERFACE
Settings
Product information – This provides the user with AGD326 version information.
WiFi Settings
A SSID – Allows the user to amend AGD326 WiFi SSID. Format of SSID as standard is as follows:
AGD326:XXXXXX-XXXX (where ‘X’ denotes the serial number of the unit). Characters aer this can be
amended to allow for easy unit identification whilst on-site
B Password – allows user to change WiFi password from default. Default password is as follows:
AGD326:XXXXXX-XXXX (where ‘X’ denotes the serial number of the unit). *Please note – password is case
sensitive and includes special characters*
AGD Systems advises leaving the password as the serial number.
C WiFi Deep Sleep – This setting (when enabled) will disable the WiFi connection aer 24 hours of initial power
up. If a WiFi connection is required aer this period, then the unit will need to be power cycled prior to any
connection attempts. Default setting is ‘enabled’.
D If any changes are made to ANY settings, this is represented by an exclamation mark at the end of the box
E Set - Send the new setting to the detector.
F R - Reload / query
Click on the menu Select relevant sub menu
A B
F
C D E