Product Manual

AGD 326
AGD 326
PEDESTRIAN ON-CROSSING DETECTOR
AGD 326
PEDESTRIAN ON-CROSSING DETECTOR
AGD 326
PEDESTRIAN ON-CROSSING DETECTOR
13
PHYSICAL INSTALLATION
The AGD326 has been designed to be installed as a pair, this is to ensure coverage of the entire crossing is achieved.
Each detector covers the far side of the crossing, this causes dead spots which the opposite detector must cover.
One detector cannot cover the entire crossing by itself, the beam pattern the radar produces can not cover the
dead zone marked below. The bigger the crossing the bigger the dead zone. E.g. on a 16mx10m crossing the
dead zone can reach up to 8m long, this area will be covered by the paired detector.
Two detectors installed together cover described dead spots.
Channel 1
Channel 4
Up to 16m
4
3
2
1
Up to 16m
Up to 10m
2
1
4
3
Up to 16m
Up to 10m
Up to 16m
Up to 10m
MUST
DETECT
ZONE
Channel 1
Channel 4
Up to 16m
4
3
2
1
Up to 16m
Up to 10m
2
1
4
3
Up to 16m
Up to 10m
Up to 16m
Up to 10m
MUST
DETECT
ZONE
Technical Resource