Product Manual

AGD 326
AGD 326
PEDESTRIAN ON-CROSSING DETECTOR
AGD 326
PEDESTRIAN ON-CROSSING DETECTOR
AGD 326
PEDESTRIAN ON-CROSSING DETECTOR
9
Installation and Commissioning
CONNECTING
The AGD326 Traic Control Radar has been designed with eiciency
and ease of use in mind. Connect using a WiFi enabled
device (laptop, tablet or phone) and setup simply using a
browser window.
This step-through process describes the actions required to
connect to the radar.
Connecting Wifi
Upon powering up, wait for the LED on the bottom of the unit
to flash 5 times, this signifies that the firmware has correctly
started. Search for the unit and identify the unit by its serial
number:
326:XXXXXX-XXXX (the ‘X’ denotes the S/N)
Click ‘connect’ and input the default password:
AGD326:XXXXXX-XXXX (the ‘X’ denotes the S/N)
The LED on the bottom of the unit should now be
illuminated blue to show WiFi is successfully connected
and your device should show connected.
Connecting Device
Complete Wifi connection step as above.
Launch a browser on your smartphone, tablet or laptop
(Modern versions of: Internet Explorer, Google Chrome and
Safari are all supported - 2016 onwards).
In the address bar of your browser, enter the ‘IP Address’:
http://192.168.4.1
You will be presented with your initial AGD Touch-setup page.