User's Manual

14
RADAR COMMANDS
*TS COMMAND & HARDWARE SELF-TEST
The radar has a built in hardware based target simulator. This command is used to perform a self-test using
this built in target simulation hardware. There are twelve targets that maybe simulated in either receding or
approaching directions
The format of the command is:
*TS=<Target Number>,<Direction><CR>
The target parameters for each target are shown in the table below.
For example
*TS=1,A<CR>
Radar Response;
<STX>ES,000018F7,00000003,X,050.0,M,016.0*16<ETX><CR>
#TS:COMPLETE<CR>
<STX>EE,000019CD,00000003,X,050.0,M,016.0,025.2,022.0*DA<ETX><CR>
<STX>QM,000019CD,00000003,X,050.0,00.00,M,104.4,100,100*7A<ETX><CR>
Target Number Speed(MPH) Range (Metres) Distance Travelled in
Beam (Metres)
1 50 16 25
2 80 16 10
3 120 16 10
4 190 16 10
5 50
32
25
6 80
32
10
7 120
32
10
8 190
32
10
9 50
64
25
10 80
64
10
11 120
64
10
12 190
64
10