Product Manual

27
AGD 343
HIGHWAYS MONITORING RADAR
AGD 343
HIGHWAYS MONITORING RADAR
AGD 343
HIGHWAYS MONITORING RADAR
AGD 343
HIGHWAYS MONITORING RADAR
Important
SAFETY PRECAUTIONS
All work must be performed in accordance with company working practices, in-line with adequate risk assessments.
Only skilled and instructed persons should carry out work with the product. Experience and safety procedures in the
following areas may be relevant:
• Working with mains power
• Working with modern electronic/electrical equipment
• Working at height
• Working at the roadside or highways
1. This product is compliant to the Restriction of Hazardous Substances (RoHS - European Union directive 2011/65/EU).
2. Should the product feature user-accessible switches, an access port will be provided. Only the specified access
port should be used to access switches. Only non-conductive tools are to be used when operating switches.
3. The product must be correctly connected to the specified power supply. All connections must be made whilst the
power supply is o or suitably isolated. Safety must take always take precedence and power must only be applied
when deemed safe to do so.
4. No user-maintainable parts are contained within the product. Removing or opening the outer casing is deemed
dangerous and will void all warranties.
5. Under no circumstances should a product suspected of damage be powered on. Internal damage may be
suggested by unusual behaviour, an unusual odour or damage to the outer casing.
Please contact AGD for further advice.
6.
This device complies with part 15 of the FCC Rules and contains licence-exempt transmitter(s)/receiver(s)
that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s) .
• Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
A separation distance of at least 20 centimetres should normally be maintained between this product
and the body of users or nearby persons.
•
• Changes or modifications not expressly approved by AGD Systems Ltd could void the user’s authority to operate
the equipment.
7. This Product is Compliant with the European Radio Equipment Directive 2014/53/EU.
There is no restrictions of use within any EU Member state for this product.
This product is Receiver Category 2.
8. Indicates compliance with all applicable Australian ACMA technical standards and associated record-keeping
(including testing) arrangements.