Product Manual

7
AGD 343
HIGHWAYS MONITORING RADAR
AGD 343
HIGHWAYS MONITORING RADAR
AGD 343
HIGHWAYS MONITORING RADAR
AGD 343
HIGHWAYS MONITORING RADAR
MOUNTING LOCATION
The AGD 343 has been designed to be mounted on a variety of structures, where it looks across the carriageway
at 30 degrees to provide highly accurate traic data.
The detector must be mounted at a minimum height of 6m above the carriageway and at an angle of
30 degrees. The AGD align set-up tool assists in accurate set up of the angle.
Mounting Location Considerations
The detector has been designed to monitor traic in inter-urban environments while maintaining resilience to
externl factors, however, care must be taken when choosing a mounting location.
Avoid where possible:
• Installing the detector where it points toward large reflective surfaces (such as signs, barriers and metal
retaining walls)
Installation
Offset Recommended Mounting Height Acceptable Mounting Height
2m 6m 6m
Oset: 2 metres
Height: 6 metres
Setup: AGD Align Visual
& Histogram
2 m
30º
CONFIGURATION:
6 m
Oset: 2 metres
Height: 6 metres
Setup: AGD Align Visual
& Histogram
2 m
30º
CONFIGURATION:
6 m