Product Manual

9
AGD 343
HIGHWAYS MONITORING RADAR
AGD 343
HIGHWAYS MONITORING RADAR
AGD 343
HIGHWAYS MONITORING RADAR
AGD 343
HIGHWAYS MONITORING RADAR
PHYSICAL INSTALLATION
Step 2 – Mount bracket to the radar
Fit the six torx screws and washers and
tighten to a torque of 1.2Nm.
Step 3 – Mount radar to the pole
Insert the M10 Mounting Bolt through
the hole in the bracket on the pole,
loosely tighten the M10 Nyloc Nut.
Position the radar at roughly
30 degrees to the road, the etched
marks on top of the bracket will help
with alignment.
Installation