User's Manual

13
SYSTEM HARDWARE OVERVIEW
RS422 SERIAL INTERFACE
A UART interface is provided that uses RS422 voltage levels on the multi-pin mating connector.
The default baud rate for this interface is 921600.
The serial interface default set-up, during normal operation is shown in the table below.
The RS422 provides the primary output of the radar in the form of ASCII messages
Interface connector details are as follows:
BULGIN - PX0410/12S/6065 - SOCKET, FREE, 12WAY (IP67 mated)
BULGIN - SA3179/1 - CONTACT, SOCKET, 26-24 AWG, SOLDER [12 off required]
The above connector will mate with the product mounted chassis plug, detailed as:
BULGIN 400 Series Buccaneer - PX0412/12P - PLUG, CHASSIS MOUNT, 12WAY
(IP67 mated) Power supply
DEFAULT UART SETTINGS
Parameter Value
Baud rate 921600
Data bits 8
Parity bits odd
Flow control None