User's Manual

IMPORTANT

SAFETY PRECAUTIONS

All work must be performed in accordance with company working practices, in-line with adequate risk

assessments. Only skilled and instructed persons should carry out work with the product. Experience and safety

procedures in the following areas may be relevant:

• Working with mains power

• Working with modern electronic/electrical equipment

• Working at height

• Working at the roadside or highways

1. This product is compliant to the Restriction of Hazardous Substances (RoHS - European Union directive

2011/65/EU).

2. Should the product feature user-accessible switches, an access port will be provided. Only the speciﬁed

access port should be used to access switches. Only non-conductive tools are to be used when operating

switches.

3. The product must be correctly connected to the speciﬁed power supply. All connections must be made

whilst the power supply is off or suitably isolated. Safety must take always take precedence and power

must only be applied when deemed safe to do so.

4. No user-maintainable parts are contained within the product. Removing or opening the outer casing is

deemed dangerous and will void all warranties.

5. Under no circumstances should a product suspected of damage be powered on. Internal damage may be

suggested by unusual behaviour, an unusual odour or damage to the outer casing. Please contact AGD

for further advice.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the

specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in

conjunction with any other antenna or transmitter.

Changes or modifications not expressly approved by the party responsible for

compliance could void the user's authority to operate the equipment