Product Manual

15
RADAR COMMANDS
*TS COMMAND & HARDWARE SELF-TEST
The radar has a built in hardware based target simulator. This command is used to perform a self-test using
this built in target simulation hardware. There are twelve targets that maybe simulated in either receding or
approaching directions
The format of the command is: *TS=<Target Number>,<Direction><CR>
The target parameters for each target are shown in the table below.
E.g. Self-test as follows; *TS=10,A
Radar Response
Target Number Speed(MPH) Range (Metres)
Distance travelled in beam (metres)
1 50 17 25
2 80 17 10
3 120 17 10
4 190 17 10
5 50
34 25
6 80
34 10
7 120
34 10
8 190
34 10
9 50
58 25
10 80
58 10
11 120
58 10
12 190
58 10