User's Manual

6
Step 2: If Necessary, Set Up the AirPort Base Station
If you purchased the AirPort Base Station at the same time as your AirPort Card, do the
following:
1
Install the AirPort Card in your computer.
2
Skip the rest of the steps in this booklet and set up the AirPort Base Station using the
instructions provided with the base station.
The AirPort Setup Assistant described in the next step is the same one used to set up the
AirPort Base Station. To set up the AirPort Base Station and configure your computer to
access the AirPort network, you only need to use the AirPort Setup Assistant once.
Step 3: Set Up Your Computer to Use AirPort
If you are going to use your computer with an AirPort network that is already established
(such as in a school or office), do the following:
1
Install the AirPort software using the CD provided with the AirPort Card.
m If you ordered the AirPort Card with your new computer, the AirPort software is already
installed. You may not have a separate AirPort CD.
Note: To make sure that your computer has the latest version of the AirPort software
installed, check the Apple AirPort Web site at www.apple.com/airport
LL2009.book Page 6 Wednesday, October 24, 2001 1:20 PM