User Manual
Table Of Contents
- Table of contents
- About this manual
- Introducing the Drystar 5500
- Basic operation (operator mode)
- Advanced operation (Key-operator mode)
- Overview of Key-operator functions
- Stopping the printing process
- Viewing printer information
- Changing the configuration settings
- Printing images
- Saving the configuration settings
- Restoring the configuration settings
- Performing the calibration procedures
- Installation
- Quality control for general radiography applications (DT 2 B & DT 2 C)
- Quality control for mammography application (DT 2 Mammo) (optional)
- Controlling the Drystar 5500 via a remote PC (with browser)
- System description
- Preventive maintenance and replacements
- Troubleshooting
- Equipment information sheet
- Drystar media density response data
- Quality Control Charts
- Remarks for HF-emission and immunity
- Remarks for HF-emission and immunity
- This device is intended for operation in the electromagnetic environment given below. The user of the device should ensure that it is used in such an environment.
- This device is intended for operation in the electromagnetic environment given below. The user of the device should ensure that it is used in such an environment.
- This device is intended for operation in the electromagnetic environment given below. The user of the device should ensure that it is used in such an environment.
- This device is intended for operation in an electromagnetic environment in which the radiated high frequency disturbance variabl...
- Remarks for HF-emission and immunity
- Index
184
2900H EN 20071108System description
DRYSTAR 5500/5503 REFERENCE MANUAL
Transport after installation
The Drystar 5500 is equipped with wheels so that moving the printer over a
short distance - if required - can be done in a convenient way.
• During movement of the Drystar 5500 take care that stability is always
ensured. Special attention should be paid to possible obstructions, and to
uneven or slant surfaces.
• Never transport the Drystar 5500 with open doors.
• Make sure that both front wheel brakes are unlocked.
1 Unlock both wheel brakes on the right and left hand sides.
2 Move the Drystar 5500 to its destination.
3 Relock the wheels by pressing the brakes down.
Refer to ‘Safety precautions’ on page 13.
Always keep in mind the following safety guidelines: