User Manual
Table Of Contents
- Table of contents
- About this manual
- Introducing the Drystar 5500
- Basic operation (operator mode)
- Advanced operation (Key-operator mode)
- Overview of Key-operator functions
- Stopping the printing process
- Viewing printer information
- Changing the configuration settings
- Printing images
- Saving the configuration settings
- Restoring the configuration settings
- Performing the calibration procedures
- Installation
- Quality control for general radiography applications (DT 2 B & DT 2 C)
- Quality control for mammography application (DT 2 Mammo) (optional)
- Controlling the Drystar 5500 via a remote PC (with browser)
- System description
- Preventive maintenance and replacements
- Troubleshooting
- Equipment information sheet
- Drystar media density response data
- Quality Control Charts
- Remarks for HF-emission and immunity
- Remarks for HF-emission and immunity
- This device is intended for operation in the electromagnetic environment given below. The user of the device should ensure that it is used in such an environment.
- This device is intended for operation in the electromagnetic environment given below. The user of the device should ensure that it is used in such an environment.
- This device is intended for operation in the electromagnetic environment given below. The user of the device should ensure that it is used in such an environment.
- This device is intended for operation in an electromagnetic environment in which the radiated high frequency disturbance variabl...
- Remarks for HF-emission and immunity
- Index
44
2900H EN 20071108Basic operation (operator mode)
DRYSTAR 5500/5503 REFERENCE MANUAL
About Drystar 5500 consumables
The Drystar 5500 can handle blue-transparent DT 2 B, clear-transparent
DT 2 C (both for general radiography) and optionally (refer to ‘Options and
accessories’ on page 235) the blue-transparent DT 2 Mammo (for the
mammography application) films.
Available film formats for general radiography applications are 8x10”,
10x12”, 11x14”, 14x14”, and 14x17”. Available film formats for the
mammography application are 8x10”, 10x12” and 11x14”.
Both input trays can use all film formats.
The Key-operator can adjust the film size setting for both input trays.
For more information about adjusting film size setting, refer to ‘Changing the film
format of the trays’ on page 180.
Labeling the input trays
The following film types can be used:
The different formats are configurated in following way in a tray:
DRYSTAR DT 2 B
8x10”, 10x12”, 11x14”, 14x14”, and 14x17”
DRYSTAR
DT 2 C
8x10”, 10x12”, 11x14”, 14x14”, and 14x17”
DRYSTAR
DT 2 Mammo
(optional)
8x10”, 10x12” and 11x14”